Receive Absolute Address; Gps Drift Suppression; Location Based Service (Lbs) - ElectroFlip iTrack 2.0 User Manual

NOTE: Default angle value is 30 degrees and must be 3 digits.

RECEIVE ABSOLUTE ADDRESS

To receive exact address including street name, you will need to set up the APN (Access Point Name)
of your local GSM network for the SIM card before using this function. If your local GSM network needs a
user name and password for GPRS then you will need to set it up according to the GPRS instructions
discussed under GPRS Configuration section (page 19).
Once setup is complete, you can send the text message containing:
Message Format: address+password
Text Message: address123456
Reply: No. 113, Nantou Guankou 2 nd Rd. Nashan District, Shenzhen, Guangdong, China

GPS DRIFT SUPPRESSION

This function is deactivated by default. When activated, the GPS data stops updating if vehicle is not
moving and latitude and longitude are keep the same. GPS data updates automatically when vehicle
starts to move.
To activate this function, send text message containing:
Message Format: suppress+password
Text Message: suppress123456
Reply: suppress drift ok
To deactivate, send text message:
Message Format: nosuppress+password
Text Message: nosupporess123456
Reply: no suppress ok

LOCATION BASED SERVICE (LBS)

When the tracker doesn't receive valid GPS signals, the tracker will locate by LBS (location based
service). The message includes the GPS coordinates of the last position in SMS mode and an LAC code
which is the current position.
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
11