Automatic Update Positions When Vehicle Turns - ElectroFlip iTrack 2.0 User Manual

 Unlimited Continuous Tracking
Send the text message containing:
Message Format: fix+intervals+time+***n+password
Text Message: fix030s***n123456
The above text message denotes that the device will continuously send GPS coordinates (***n) each
30 seconds (030s).
 Smart Track Upon Time and Distance Interval
This function allows the tracker to track or locate upon both pre-set time and distance. Before
setting up this function, make sure that Unlimited Continuous Tracking has been setup.
To setup please send the command below:
Message Format: distance+password+space+distance
Text Message: distance123456 0050
Reply: Distance ok
NOTE: Distance must be in 4 digits Arabic numbers. You can also set this function through the web
server (GPRS server). Just set the time interval first then the distance interval. Once set the
tracker will locate upon the time and distance.
 Cancelling Auto-Tracking
Send the text message containing:
Message Format: nofix+password
Text Message: nofix123456
AUTOMATIC UPDATE POSITIONS WHEN VEHICLE TURNS (GPRS Mode Only)
The function allows the tracker to update its position automatically to the GPRS web server once the
vehicle changed driving direction over preset angle value to form a smooth trajectory consistent with the
actual road.
To activate, send text message containing:
Message Format: angle+password+space+angle
Text Message: angle123456
040 Reply: angle ok
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
(it means distance is 50 meters)
No unauthorized reproduction is allowed.
10