Setup Monitor Center Number; Alarm Functions And Setup; Geo-Fence - ElectroFlip iTrack 2.0 User Manual

Table of Contents

Advertisement

SETUP MONITOR CENTER NUMBER

This function allows you to setup a central monitoring number where text messages of auto- tracking
will be sent. To set this function, send a text message containing:
Message Format: centernum+password+space+number
Text Message: centernum123456
138001138000 Reply: centernum ok
To deactivate this function, send text message:
Message Format: nocenternum+password
Text Message: nocenternum123456
Reply: no center num ok

ALARM FUNCTIONS AND SETUP

When the alarm function is setup, alarms in the form of text message/SMS will be sent to all
authorized phone numbers once the alarms are triggered. If the tracking unit remains in
triggered status and the alarms are not canceled, the tracking device will continue sending alarms
to authorized phone numbers every 3 minutes. If the unit is operating in GPRS mode instead of SMS
mode, the unit will send alarms to web-based online system. Below are the list of alarm functions and
how to set them up on the tracker.

GEO-FENCE

This alarm restricts the movement of the vehicle where the tracker is attached to within a district.
When the vehicle goes out of the specified area the tracking device will send text message/SMS to
the authorized phone numbers. To setup the function, follow the steps below:
1.
Let the tracker stay in one place for 3 to 10 minutes.
2.
Then, send a text message containing:
stockade+password+space+latitude,longitude;latitude,longitude
If the device goes out of the set restricted area, it will send a text message "stockade!+geo- info"
to the authorized phone number. The tracker will stop sending alarm once the device returns to the
designated area.
To cancel this alarm, just send a text message containing: nostockade+password
NOTE: The latitude and longitude format is like dd.dddddd and up to 6 decimal places. For south
latitudes and west longitudes please add '-' before the digits. The first latitude and longitude is the
coordinate of the top left corner of the geo-fence while the second latitude and longitude is the
coordinate of the bottom right corner.
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
16

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ElectroFlip iTrack 2.0

Table of Contents