Check Itrack2 Status; Check Imei; Setting The Time Zone Of Your Tracker; Monitor (Sound Surveillance) Mode - ElectroFlip iTrack 2.0 User Manual

CHECK iTRACK2 STATUS

This command is to check the status/state of your tracker in terms of power, battery level, GPS and GSM
signal. To check, send the text message containing:
Message Format: check+password
Text Message/Command: check123456
Reply: Power: Power off
Battery: 100%
(or NO GPS)
GPS: OK
GSM Signal: 1-32

CHECK IMEI

To check the 15 digit IMEI (International Mobile Equipment Identity) number of your tracking unit, send
a text message containing:
Message Format: imei+password
Text Message/Command: imei123456
Reply: 15 digit IMEI number

SETTING THE TIME ZONE OF YOUR TRACKER

Different countries as well as different state in the US observe different time zones. If you do not
know your specific time zone please search it through Google before configuring this setting. Then,
send a text message containing:
Message Format: time+space+zone+password+space+time
Text Message/Command: time zone123456 -8
Reply: time ok

MONITOR (SOUND SURVEILLANCE) MODE

To monitor the surrounding sounds to help identify what's going on at the location it's in, send a text
message containing:
Message Format: monitor+password
Text Message/Command: monitor123456
Reply: monitor ok
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
(could either be Power off/charging/charge finish)
(this will decrease as unit is used)
(The higher the number shown the stronger the GSM signal)
No unauthorized reproduction is allowed.
(Note: -8 is the Pacific Coast time zone)
12