Multi-Area Management - ElectroFlip iTrack 2.0 User Manual

MULTI-AREA MANAGEMENT

 Set Area
Send text message containing:
Message Format:
area+password+space+latitude+longitude+space+areaname,distanceM
Text Message: area123456 22.353648,113.543678 school,800M
Reply: area01 ok
NOTE: Distance unit: M (meter) and K (kilometer). You can add up to 5 areas at most but the
distance between two points can't be less than the total distance in the 2 commands and
different areas can't cover each other.
 Delete Areas
Message Format: noarea+password+space+areaname
Text Message: noarea123456 school
Reply: noarea ok
 Rename and Set Distance
old name;
Message Format: rename+password+space new name,distanceM
Text Message: rename123456 area01;school,800M
Reply: rename ok
NOTE: Name must not be repeated and area must not cover each other.
 Activate Multi-Area Management
Message Format: area+password+space+on
Text Message: area123456 on
Reply: area on ok
When the tracker enters the preset area, it will send a text message with a format
"areaname+latitude & longitude" to all authorized phone number and sends text message
when it goes out of the preset area.
 Deactivate Multi-Area Management
Message Format: area+password+space+off
Text Message: area123456 off
Reply: area off ok
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
17