Siemens FDOOT241-9 Technical Manual page 19

Mounting and removal of base adapter FDB241 on detector base
Building Technologies
Fire Safety
Variant 1: The existing SPF3600 or DB1131 detector bases continue
to be used
1. Use the base adapter FDB241.
2. Observe the information in the table below.
3. Place the jumper in the position that corresponds to the existing detector type.
Fig. 1 Removal and disposal of existing detector
Jumper position on base adapter for existing detector type
Fig. 2 Mounting of base adapter on detector and detector base
Fig. 3 Disengaging lock to remove FDB241 with tools
Mounting sequence
1 2
* Jumper position when delivered
Undertaking modernization
Step 1: Detector modernization
A6V10323158_d_en_--
4
19
2015-04-09