Returning For Service; Warranty; Globaltestsupply; Com Sales@Globaltestsupply.com - DeFelsko PosiTector 200 Instruction Manual

Before returning the Gage for service...
1.Install new or newly recharged batteries in the proper alignment
as shown within battery compartment.
2.Examine the probe tip for dirt or damage.
3.Perform a Hard Reset (pg. 13) and a Zero (pg. 11).
4.Place a plastic shim onto a hard surface (i.e. glass) and attempt
a measurement. (pg. 8)
IMPORTANT:
If you must return the Gage for service, please fill out and include
Gage. Be sure to also include the probe, your company name,
company contact, telephone number and fax number or email
address.
DeFelsko's sole warranty, remedy, and liability are the express
limited warranty, remedy, and limited liability that are set forth on
it
This manual is copyrighted with all rights reserved and may not be reproduced or transmitted, in whole or
part, by any means, without written permission from DeFelsko Corporation.
DeFelsko and PosiTector are trademarks of DeFelsko Corporation registered in the U.S. and in other
countries. Other brand or product names are trademarks or registered trademarks of their respective
holders.
Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not
responsible for printing or clerical errors.
Find Quality Products Online at:

Returning for Service

Returning for Service
Limited Warranty, Sole Remedy
Limited Warranty, Sole Remedy
and Limited Liability
and Limited Liability
© DeFelsko Corporation USA 2014

GlobalTestSupply

www.
All Rights Reserved
40
with the
.com
sales@GlobalTestSupply.com