Advanced Models Menu - DeFelsko PosiTector 200 Instruction Manual

Advanced models
batches. The Memory Menu includes the following options...
New Batch
Closes any currently opened batch and creates a new batch name
using the lowest available number. For example, if only Batch 1
and Batch 3 exist, then Batch 2 would be created and made the
current batch. The
displayed. Each measurement will be displayed and stored into
this new batch. On screen statistics are immediately updated with
each measurement. New batch names are date stamped at the
time they are created. Each reading is also data/time stamped.
Shortcut:
current batch
Mean (average)
Maximum
measurement
NOTES:
• Remove the last reading from the current open batch by
pressing (-).
• Calibration adjustments cannot be made if readings are
stored in memory.
• If memory is ON, continuous measurements can be taken but
results will not be stored in memory.
Open
Selects a previously created batch name to open and make
current. If it contains measurements, onscreen statistics will
immediately reflect values calculated from this batch.
Close
Stops the recording process, closes the current batch, and
removes batch information from the display.
Find Quality Products Online at:
store 100,000 readings in up to 1,000
icon appears and basic statistics are
When a batch is open, press (+) to create a new batch
GlobalTestSupply
www.
# readings in current batch
measurement
Last reading
.com
19
Standard Deviation
Minimum
sales@GlobalTestSupply.com