Removal; Adjusting The Carriage - KIDDY Isofix Base 2 Instruction Manual

EN
Traces of use or discolouration can appear on some vehicle seat cov-
ers made from sensitive materials (e.g. velour, leather etc.) if car seats
or platforms are used. To avoid this we recommend to place a seat
cover shield or protection mat underneath the product.

5. Removal

First remove the Kiddy child seat according to its instructions from the
Isofix platform.
Now you can start to dismantle the platform.
Push both Isofix release buttons to the inside (fig. 4, no. 1) and pull
both forward simultaneously (fig. 4, no. 2), now pull the platform from
the anchor fittings forward (fig. 4, no. 3).
Now you can slide the support foot in by swinging the support leg
fixing cover backwards (fig. 5, no. 1) and pushing the support foot into
the support leg (fig. 5, no. 2). You can now fold the support leg under
the platform.

6. Adjusting the carriage

The carriage can be moved forwards and backwards.
Push the slide releases at the knee of the platform to the back
(fig. 6, no. 1) and pull or push the carriage in the desired direction at
the same time (fig. 6, no. 2).
Let go of the slide release. The next possible locking position can be
found by moving the carriage. Make sure that the carriage locks into
place again and that the indicator shows green (fig. 6, no. 3).
8