38 Moving and unpacking the module
Lifting the modules
Lift the unpacked module only from its lifting holes.
R8i DC/DC converter module
Moving the modules
WARNING! If you ignore the following instructions, injury or death, or damage
to the equipment can occur.
•
Use extreme caution when maneuvering a module that runs on wheels. The modules
are heavy and have a high center of gravity. They topple over easily if handled
carelessly.
•
Do not tilt the module. Do not leave the module unattended on a sloping floor
•
Wear protective gloves and long sleeves! Some parts have sharp edges.
Do not tilt!
For more information on placing the module into the cubicle, see
converter module
on page
Do not leave the module
unattended on a sloping floor!
106
and
Replacing the BDCL filter
BDCL filter
Replacing the R8i DC/DC
on page 110.