Install Optional Modules, If Any; Install Side Plates And Covers - ABB ACS580-01 Quick Installation

Install optional modules, if any

See chapter Electrical installation in ACS580-01 (0.75 to 250 kW) hardware manual
(3AXD50000018826 [English]).

Install side plates and covers

See figure R6...R9 Figures E
IP21
1. Reinstall the side plates of the cable entry box. Tighten the retaining screws with a
screwdriver.
2. Slide the cover of the cable entry box on the module from below until the cover
snaps into place.
3. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
IP55
1. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
For start-up instructions, see chapter
EN – R6...R9 Quick installation guide 23
on page 159.
EN – Quick start-up guide on page 163.
R0-
R4
R6-
R9
R6-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH ZH