Package Contents - Eizo RadiForce GX560 Instructions For Use Manual

●
Simple wiring
In addition to a DisplayPort input terminal, an output terminal is also provided.
• From the output terminal (
●
Monitor operation from the mouse and keyboard
Using the RadiCS / RadiCS LE monitor quality control software, you can perform the following
monitor operations using the mouse and keyboard:
• Switching CAL Switch modes
• Switching input signals
• Function that assigns any CAL Switch mode to a part of the screen and displays an image (Point-
and-Focus)
• Switching PCs that use USB devices (Switch-and-Go)
• Entering power saving mode (Backlight Saver)

1-2. Package Contents

Check that all of the following items are contained in the package. If any of these are missing or
damaged, contact your dealer or local EIZO representative listed on the attached sheet.
Note
• It is recommended that the box and packing materials be stored so that they can be used to move or transport
this product.
• Monitor
• Power cord
• Digital signal cable: PP300 x 2
DisplayPort - DisplayPort
), a signal can be output to a different monitor.
• USB cable: UU300 x 2
• EIZO LCD Utility Disk (CD-ROM)
• Instructions for Use
11
Chapter 1 Introduction