Eizo RadiForce GX560 Instructions For Use Manual page 16

When connecting other monitors using a daisy-chain connection
Output the signal input into
Attention
• Visit the EIZO website for information about monitors and graphic boards that can be used for the daisy-
chain connection: http://www.eizoglobal.com
• When using a daisy-chain connection, connect the cable to the input connector
• To set up a daisy-chain connection, you need to select "Signal Format" - "DisplayPort1" on the Administrator
Settings menu, and set "Version" to "1.2". For details, refer to the Installation Manual (on the CD-ROM).
• Remove the
Connect to PC
Signal cable: PP300
3.
Plug the power cord into a power outlet and the power connector on the
monitor.
Insert the power cord fully into the monitor.
16
Chapter 2 Installation / Connection
to another monitor.
cap before connecting the signal cable.
Signal cable: PP300
.