Eizo RadiForce GX560 Instructions For Use Manual page 17

4.
When you use RadiCS / RadiCS LE or connect a USB device (peripheral device
that supports USB) to the monitor, connect the USB cable to the monitor's
USB upstream port and the PC.
Attention
• Connect a PC installed with RadiCS / RadiCS LE to
• A cap is attached to
Note
• Switching between PCs that use USB devices can be performed by connecting two PCs to two monitors as
in the following figure.
• For details on how to switch PCs that use USB devices, refer to the Installation Manual (on the CD-ROM).
USB cable: UU300
prior to shipment. Remove the cap when using
to perform monitor quality control.
.
Chapter 2 Installation / Connection
17