Password Settings - Sagem SAGEMFAST 1500WG Reference Manual

4.3.2

Password Settings

Use this page to change the password for accessing the management interface of the
F@st™ 1500 ADSL Router
case sensitive.
If you lost the password, or you cannot gain access to the user interface, press the
blue reset button on the rear panel, holding it down for at least five seconds to
restore the factory defaults. The default password is "empty".
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time
for which the login session is maintained during inactivity. If the connection is
inactive for longer than the maximum idle time, it will perform system logout, and
you have to log in again to access the management interface. The default timeout
is fixed to 10 minutes.
Reproduction and communication prohibited without the written permission of E
4 - Configuring the SAGEM F@st™ 1500 ADSL router
. Passwords can contain from 3 to 12 alphanumeric characters and are
SAGEM F@st™ 1500 Reference Manual - 288053220-04
SAGEM
E
E E
Page 4-13