It therefore reserves the right to modify its documentation accordingly without notice. All brands mentioned in this guide are registered by their respective owners: - SAGEM F@st™ is a registered brand of Sagem Communications. - Windows and Internet Explorer are registered brands of Microsoft Corporation.
Troubleshooting Annex B CE compliance declaration Annex C Environment Annex D Technical Characteristics Default configuration Annex E Glossary Annex F Connection technology Annex G SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 0-2 Sagem Communications document. Reproduction and disclosure prohibited...
Connecting the Wi-Fi interface of your router to your computer 2.3.4 Connecting the Ethernet interface of your router to your TV decoder 2-10 Installation instructions 2-11 3. Installing and configuring the SAGEM F@st 2604/2644 router 4. Configuration of network parameters 5. Information / Configuration Accessing the welcome screen Recommendations...
Page 6
5.10.2.1 LAN 5-121 5.10.2.2 WAN 5-122 5.10.2.3 ATM 5-123 5.10.2.4 ADSL 5-124 5.10.3 Route 5-126 5.10.4 ARP 5-127 5.10.5 DHCP 5-128 5.10.6 Station Info 5-129 SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 0-4 Sagem Communications document. Reproduction and disclosure prohibited...
Page 7
Returning to the factory configuration Offline mode B. Annex B - Warnings for safety Warnings for safety B.1.1 Safety levels in relation to the case EC compliance declaration SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 0-5...
Page 8
G. Annex G - Connector Technology Pinouts of the " ADSL" connector Pinouts of the "PWR" connector Pinouts of the "ETH1", "ETH2", "ETH3" and "ETH4" connectors SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 0-6 Sagem Communications document. Reproduction and disclosure prohibited...
1 - Introduction Presentation This reference manual is dedicated to the SAGEM F@st 2604 and SAGEM F@st 2644 product ranges. These products are routers which give users, broadband Internet access from their computer or their games console by various Ethernet (10 or 100 BASE-T) or Wi-Fi (IEEE 802.11g) interfaces via an ADSL/ADSL2/ ADSL2+ network.
Page 13
Multi-VC ATM and ATM Quality of service (CBR, UBR, VBR), UpnP, TR069, QoS, Upgrade Firmware (Local and Remote), Backup/Restore and Upgrade configuration file (Local and Remote). SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 1-3...
The router is supplied in a pack the composition of which changes according to the equipment (SAGEM F@st 2604 and SAGEM F@st 2644): As an example, please find below the "pack" chosen for the SAGEM F@st 2604 router, i.e.: 1 SAGEM F@st 2604,...
Standard pack (see annex G for use of Wi-Fi). Before installing the router, we advise you to uninstall any modem or other router (for example, an ADSL router). SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 1-5...
Figure 2.1 - Overview of case This case consists principally of a lid and a base. Inside is a printed circuit equipped with electronic components. The components of the base different according to the equipment (SAGEM F@st 2604 or SAGEM F@st 2644)(see §...
On/Off switch. Miniature jack fixed connector. This connector enables the router to be supplied with direct current from a mains adapter unit. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-3...
Ethernet port (ETH1, ETH2, ETH3 or ETH4) has detected a link with Lit on steady 10 Mbps device Amber Flickering Tx/Rx traffic at 10 Mbit/s No link detected on the Ethernet port SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 2-4 Sagem Communications document. Reproduction and disclosure prohibited...
2 - Description and connection of your router Connecting the ports of your router Figure 2.2 - Interconnection of ports of SAGEM F@st 2604 et 2644 SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited...
Connect one end of the RJ11/RJ11 cable supplied with the equipment to the ADSL socket of your Residential Gateway. Connect the other end of this cable as shown in the Figure 2.3. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 2-6 Sagem Communications document. Reproduction and disclosure prohibited...
Page 23
2 - Description and connection of your router Figure 2.3 - ADSL line / Power Supply Connection SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-7...
ETH4) in the case of the SAGEM F@st 2604 and SAGEM F@st 2644) of your router, Connect the other end of the cable to your computer. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 2-8 Sagem Communications document. Reproduction and disclosure prohibited...
This key should only be connected to your computer during installation of the Wi-Fi drivers (standard 802.11b/g)(see Quick Installation Guide). You can also use the wifi adapter incorporated in your computer. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-9...
ETH4) of your router. Connect the other end of the cable to a TV decoder. Note: For connection to the decoder, refer to the manufacturer's documentation. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 2-10 Sagem Communications document. Reproduction and disclosure prohibited...
It is prohibited to open the case. Only qualified personnel approved by your supplier may do Do not use liquid or spray cleaning agents. SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 2-11...
Page 28
2 - Description and connection of router SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A Page 2-12 Sagem Communications document. Reproduction and disclosure prohibited...
3. Installing and configuring the SAGEM F@st 2604/2644 router SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 3-1...
Page 30
3 - Installing and configuring the SAGEM F@st 2604/2644 router For the installation of the SAGEM F@st 2604/2644, please refer to the Quick Installation Guide of this product SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 3-2 Sagem Communications document. Reproduction and disclosure prohibited...
This section covers configuring as a DHCP client Page 4-3 reading status of the DHCP server Page 4-4 reading data of the DHCP client Page 4-5 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 4-1...
Page 32
It is imperative that your computer is configured as a DHCP client or that it has a fixed IP address in the configuration range defined by the DHCP server. Configuration as a DHCP client is the more commonly used solution. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 4-2 Sagem Communications document. Reproduction and disclosure prohibited...
Page 33
"Obtain an IP address automatically" and the case "Obtain the addresses of the DNS servers automatically". • click the OK button to confirm your choice. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 4-3...
Page 34
This IP address must belong to the same sub-network as that of the local network. Displays the period for obtaining (in hours) an IP Leased Time (hour) address for a terminal. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 4-4 Sagem Communications document. Reproduction and disclosure prohibited...
Page 35
Click the Start button, select Execute, enter cmd and then click OK; the command prompt screen appears. Enter ipconfig /all (or ipconfig/all) then confirm by pressing Enter. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited...
"Password" field. Then click on to confirm. Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the screen. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-2 Sagem Communications document. Reproduction and disclosure prohibited...
Page 39
5 - Information / Configuration Your computer's Web browser opens and displays the router's welcome screen. The equipment's name is displayed in title (SAGEM F@st 2604 or SAGEM F@st 2644). Equipment configuration sections appear in the left hand side of the welcome screen.
3) All the fields in the different screens are explained in a table. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-4 Sagem Communications document. Reproduction and disclosure prohibited...
Displays the nominal down line transmission rate Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed Allows your router to be started SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-5...
Page 42
Default gateway address Primary DNS Server Primary DNS server address Secondary DNS Server Secondary DNS server address Date / Time Date and Time (see Note) SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-6 Sagem Communications document. Reproduction and disclosure prohibited...
"Rerun Diagnostic Tests" at the bottom of the "Help" page, to check that the test has been conclusive. If the test still displays "FAIL", you must follow the troubleshooting procedure displayed on this page. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-7...
Page 44
5 - Information / Configuration • Select the Diagnostics menu in the Status section; the following screen opens: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-8 Sagem Communications document. Reproduction and disclosure prohibited...
In the supervision box, indicator “Internet” passes from the green to the yellow and the text “Connected” is replaced by “Waiting for ISP”. • On the front panel, the indicator @ goes out. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-9...
These menus must only be accessed/modified by experienced users. 5.7.1 Basic • Select the Basic menu in the Wireless section to display the following wireless network configuration screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-10 Sagem Communications document. Reproduction and disclosure prohibited...
Conform to the CE Declaration of conformity / Radio rules list in appendix B to paragraph B.2. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-11...
The router may or may not be secured, at the request of the customer. This level of security is indicated on the label pasted to the box. This choice will modify the Wireless configuration screen. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-12 Sagem Communications document. Reproduction and disclosure prohibited...
Page 49
The characters are "0" to "9" and "A" to "F". Store the key phrase and the keys in a safe location. Do not write them in a file on your computer. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-13...
Enable Guest SSID Check the appropriate box to activate the "Guest SSID". Box not checked Enter a name for the "Guest SSID". Guest SSID Guest SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-14 Sagem Communications document. Reproduction and disclosure prohibited...
The WPA encryption mode is the most robust and the best adapted to correctly securing your wireless network. • Select the Security menu in the Wireless section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-15...
Page 52
Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-16 Sagem Communications document. Reproduction and disclosure prohibited...
No restrictions concerning security are demanded. In this authentication mode, only the WEP key may be used to encrypt data. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-17...
Page 54
See subsection 5.7.1.2 - WEP. Current Network Key See subsection 5.7.1.2 - WEP. Network Key x (1 to 4) See subsection 5.7.1.2 - WEP. Empty SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-18 Sagem Communications document. Reproduction and disclosure prohibited...
Page 55
See subsection 5.7.1.2 - WEP. Key Phrase Empty See subsection 5.7.1.2 - WEP. Current Network Key Select key 2 or 3 (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-19...
Page 56
"Current Key" (see subsection 5.7.1.2- WEP). This field is empty or displays the key Non modifiable value entered earlier (greyed out) SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-20 Sagem Communications document. Reproduction and disclosure prohibited...
Page 57
Select the WPA encryption required from the TKIP scroll down list: • TKIP (Temporal Key Integration Protocol), • AES (Advanced Encryption Standard), • TKIP+ AES. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-21...
Page 58
Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-22 Sagem Communications document. Reproduction and disclosure prohibited...
Page 59
(LAN broadcast). WPA encryption Select the WPA encryption required from the TKIP scroll down list: • TKIP, • AES, • TKIP+ AES. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-23...
Page 60
Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-24 Sagem Communications document. Reproduction and disclosure prohibited...
Page 61
This encryption mode applies the functionalities of the WPA2 protocol and requires the use of a "RADIUS" authentication server. • Select "WPA2" security from scroll down list; following screen appears: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-25...
Page 62
Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-26 Sagem Communications document. Reproduction and disclosure prohibited...
Page 63
(Renewing) broadcast multicast (LAN broadcast). WPA encryption Select the WPA encryption required from the scroll down list: • TKIP, • AES, • TKIP+ AES. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-27...
Page 64
Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-28 Sagem Communications document. Reproduction and disclosure prohibited...
Page 65
Enter the port used by the "RADIUS" 1812 authentication server. RADIUS Key Enter the secret key shared between the authentication server and its clients SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-29...
Page 66
Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-30 Sagem Communications document. Reproduction and disclosure prohibited...
Page 67
(256 bits). Click on the "Save/Apply" button to validate the entry. Note: You may display your secret phrase by clicking on "Click here to display". SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-31...
Page 68
Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-32 Sagem Communications document. Reproduction and disclosure prohibited...
Denied : Refuses computers whose MAC address is in the list to use your wireless network. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-33...
Page 70
(MAC Restrict Mode) “Allow” to authorize only the computers whose MAC address appears in the list to be connected to your router. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-34 Sagem Communications document. Reproduction and disclosure prohibited...
Object: This menu is used to configure the essential parameters of your wireless network (WLAN) 802.11 and configure certain security parameters. • Select the Advanced menu in the Wireless section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-35...
Page 72
It is recommended not to reduce the packet size too much to avoid reducing the bandwidth. Enter a threshold value (in bytes) between 256 and 2347. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-36 Sagem Communications document. Reproduction and disclosure prohibited...
Page 73
802.11 environments (g and b for example) or Off to improve the quality only on the 802.11g environments but degrade it on other environments (802.11b for example). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-37...
Page 74
60 %, 80 % or 100 %) at which you want to transmit. Note: The power rate will be selected according to your environment. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-38 Sagem Communications document. Reproduction and disclosure prohibited...
In the scroll down list, select Enabled or Disabled to permit or prohibit a more effective bit rate of the data flow with, on the other hand, a higher error rate. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-39...
Page 76
The following screen appears as soon as you activate "WMM". • Click on the Add QoS Entry button to add a Wi-Fi Quality of Service (wifi QoS) rule; the following screen appears. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-40 Sagem Communications document. Reproduction and disclosure prohibited...
Page 77
6 - WMM Voice priority These are higher priorities. They provide complete routing for voice 7 - WMM Voice priority Click on the button to save the parameters. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-41...
(WAN) to computers on the local network (LAN) via the Internal Ports. • Select the Port forwarding menu in the section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-42 Sagem Communications document. Reproduction and disclosure prohibited...
Page 79
This internal end port (LAN side) is associated with the external end port (WAN) side. Note: This cannot be modified. Server IP Address Computer address delivered by your router's DHCP server. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-43...
Page 80
5 - Information / Configuration • Click on the Add button; the following screen appears: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-44 Sagem Communications document. Reproduction and disclosure prohibited...
Page 81
When you allocate a number to an "External Port Start", the same number is automatically allocated "Internal Port Start" identically "External Port End", SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-45...
Page 82
The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569 (WAN side) and via the internal ports 3568 and 3569 (LAN side). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-46 Sagem Communications document. Reproduction and disclosure prohibited...
Port Range A port range contains a Start port and an End port. Note: A single port is characterised by an identical start port and end port. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-47...
Page 84
Complete the ID Host of your computer's IP address (this is attributed by your router's DHCP server). • Fill in the "Trigger Port Start", "Trigger Port End", "Trigger Port Start", "Trigger Port End" and "Protocol" fields. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-48 Sagem Communications document. Reproduction and disclosure prohibited...
Page 85
Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of port range 3100 to 3999 for your computer to access this service. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited...
Note: Click on the Save/Apply button to take account of the address or its erasure. The "DMZ" zone is deactivated by default. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-50 Sagem Communications document. Reproduction and disclosure prohibited...
Field Meaning Default SIP Enabled Check the box to permit telephoning in VoIP via the Checked Wi-Fi or Ethernet interfaces using the SIP protocol. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-51...
Object: This menu is associated with the remote network. It is used to display the list of all the configured PVCs, to add PVCs or remove them. • Select the menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-52 Sagem Communications document. Reproduction and disclosure prohibited...
Page 89
This function enables the distribution of Multicast datagrams over the local network (LAN) and interaction between the router and the local network hosts. • Click on the Add button to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-53...
Page 90
This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type of service is selected. This file only appears when the "Non Realtime VBR" or "Realtime VBR" type of service is selected. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-54 Sagem Communications document. Reproduction and disclosure prohibited...
Page 91
PPP over ATM (PPPoA) Field Action Default Encapsulation Mode Select the encapsulation of your choice from the VC/MUX scroll down list. • VC/MUX, • LLC/ENCAPSULATION. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-55...
Page 92
Encapsulation Mode LLC/SNAP- scroll down list. BRIDGING • LLC/SNAP-BRIDGING, • VC/MUX. PPPoE/PPPoA The encapsulation mode field will be selected automatically with PPPoE/PPPoA protocol type. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-56 Sagem Communications document. Reproduction and disclosure prohibited...
Page 93
(minutes) [1-4320]: 4320 (i.e. 72 hours). This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-57...
Page 94
Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. This field only appears when the "Use Static IP Address" field is activated (box checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-58 Sagem Communications document. Reproduction and disclosure prohibited...
Page 95
"Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. • Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-59...
Page 96
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-60 Sagem Communications document. Reproduction and disclosure prohibited...
Page 97
1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE session is interrupted. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-61...
Page 98
The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-62 Sagem Communications document. Reproduction and disclosure prohibited...
Page 99
For example: pppoe_0_35_1. Note: You may enter another service name. Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-63...
Page 100
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-64 Sagem Communications document. Reproduction and disclosure prohibited...
Page 101
This field only appears when the "Use the following IP address:" field is activated (box checked). This field only appears when the "Use the following default gateway:" field is activated (box checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited...
Page 102
Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Use the following DNS server addresses:" field is activated (box checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-66 Sagem Communications document. Reproduction and disclosure prohibited...
Page 103
This name, which is allocated automatically, is made up as follows: Protocol_VPI_VCI_Index For example: mer_0_35_1. Note: You may enter a different service name. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-67...
Page 104
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-68 Sagem Communications document. Reproduction and disclosure prohibited...
Page 105
If you check this box, you must enter DNS server addresses: server addresses. Primary DNS server Enter a primary server DNS Address. Secondary DNS server Enter a secondary server DNS Address. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-69...
Page 106
For example: ipoa _0_35_1. Note: You may enter another service name. • Click on the Next button to continue configuring the remote network (WAN) in IPoA mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-70 Sagem Communications document. Reproduction and disclosure prohibited...
Page 107
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-71...
Page 108
Enter the IP address of the external network of the "Set Top Box" connected virtually to this "PVC". SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-72 Sagem Communications document. Reproduction and disclosure prohibited...
Page 109
Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled IGMP Multicast In the "Bridge" connection, this field is: Not Applicable SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-73...
Page 110
1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE/PPPoA session is interrupted. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-74 Sagem Communications document. Reproduction and disclosure prohibited...
Page 111
The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-75...
Page 112
Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-76 Sagem Communications document. Reproduction and disclosure prohibited...
Page 113
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-77...
Enable IGMP Snooping Box not Group Management Protocol) protocol. This checked lets you manage the declarations of belonging to one or more groups with Multicast routers. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-78 Sagem Communications document. Reproduction and disclosure prohibited...
Page 115
This field only appears when the "Enable DHCP" field is activated (box checked). This field only appears when the "Configure the second IP Address and Subnet Mask for LAN interface" field is activated (box checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-79...
This computer can be part of a LAN (Local Area Network). IP Address Displays the IP Address delivered by your 192.168.1.1 router's DHCP server to your computer. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-80 Sagem Communications document. Reproduction and disclosure prohibited...
To reserve the current address, check the "Select" box; both "MAC Address" and "IP Address" fields appear in the relevant fields of the "Reserved IP Addresses" area, then click on the button. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-81...
Page 118
Click in the box to delete MAC Address and IP Address of the table. All the reserved addresses belong to the range of addresses assigned by router's DHCP server (192.168.1.2 to 192.168.1.254). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-82 Sagem Communications document. Reproduction and disclosure prohibited...
Source IP address / Subnet mask. Source Port Source port Dest. Address / Mask Destination IP address / Subnet mask. Dest. Port Destination port. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-83...
Page 120
Enter a "destination" port (WAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-84 Sagem Communications document. Reproduction and disclosure prohibited...
Page 121
By default, all the incoming data is refused when the Firewall is activated. • Select the Incoming sub-menu in the Security menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-85...
Page 122
Enter a "destination" port (LAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-86 Sagem Communications document. Reproduction and disclosure prohibited...
“keyword or a “Domain Name”. • Select the Block Sites sub-menu in the Security menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-87...
Page 124
Blocked Sites Trusted IP Address Enter the IP address of the LAN computer to be authorized access to blocked sites. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-88 Sagem Communications document. Reproduction and disclosure prohibited...
The quality of service is only significant if all the traffic (data, video) is greater than the up rate of the ADSL line. • Select the Quality of Service menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-89...
Page 126
: Routers mark Routing traffic to CS6, CS7 (111000) Note : This drop-down list is present only if the box “Enable Qos” is checked. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-90 Sagem Communications document. Reproduction and disclosure prohibited...
QoS Queue. Enable QoS enabled or disabled for this interface. Note: This status can be amended starting from this window. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-91...
Page 128
: High priority for this queue, : Medium priority for this queue, : Low priority for this queue. Note : A high priority leads to low packet loss. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-92 Sagem Communications document. Reproduction and disclosure prohibited...
Subject: Classification of packets into traffic classes. Enforcement of policies using queing. • Select the QoS Classification sub-menu in the Quality of Service menu to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-93...
Page 130
802.1P Priority field 802.1P (value between 0 and 7). Order Sequence number. Enable/Disable QoS enabled or disabled for this traffic class. Note: This status can be amended starting from this window. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-94 Sagem Communications document. Reproduction and disclosure prohibited...
Page 131
5 - Information / Configuration • Click on the Add button to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-95...
Page 132
Note: The "Enable 802.1q" box is only present in "Bridging" mode. This condition is transparent for the other modes. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-96 Sagem Communications document. Reproduction and disclosure prohibited...
Page 133
Select Blank or a priority value between 0 and 7 from the scroll down list. Note: 802.1p Priority cannot be selected together with IP traffic condition. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-97...
(pppoe_8_35_1 for not checked example). Interface used this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-98 Sagem Communications document. Reproduction and disclosure prohibited...
Field Meaning Destination Remote network IP address Subnet Mask Remote subnet mask Gateway Default gateway of the remote network Interface Remote network interface SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-99...
Page 136
Empty Use Interface Select the interface you want to use from Box checked the scroll down list (pppoa_8_35_1 for Interface example). used SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-100 Sagem Communications document. Reproduction and disclosure prohibited...
VPI/VCI associated with the interface. (LAN) Version Select the RIP version of your choice from the scroll down list. • for RIP1, • for RIP2, • Both. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-101...
Page 138
(silent mode). Enabled Check the box to activate the "RIP" function on Box not the interface you want (LAN or WAN for checked example). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-102 Sagem Communications document. Reproduction and disclosure prohibited...
Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Enable Automatic Assigned DNS" field is deactivated (box not checked). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-103...
On the screen above, The fields of the table are detailed in the next subsection (Add). The "Service" field is automatically filled by the system in "dyndns". SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-104 Sagem Communications document. Reproduction and disclosure prohibited...
Page 142
Enter the account name supplied to you by the dynamic DNS provider. Password Enter the account password provided to you by the dynamic DNS provider. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-106 Sagem Communications document. Reproduction and disclosure prohibited...
Box checked AnnexL Enabled Box checked ADSL2+ Enabled Box checked AnnexM Enabled Box not checked Check the boxes according to the characteristics of your line. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-107...
Page 144
Click on the Advanced Settings button to display the following screen: Field Default Normal Selected box Reverb Box not selected Medley Box not selected No retrain Box not selected Box not selected SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-108 Sagem Communications document. Reproduction and disclosure prohibited...
Page 145
All the tones are selected by default. To select a tone, simply check the associated box. To not select a tone, simply leave its associated box empty. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-109...
(ENET (1-4)) ports are gathered and seen like only one virtual port. When the box is checked, these ports are independently seen fall performances of the transfers between ports is noted. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-110 Sagem Communications document. Reproduction and disclosure prohibited...
Page 147
By default, all the interfaces are dedicated to data and are associated with the first VC (Virtual Channel) existing or created. • Click on the Add button to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-111...
Page 148
ATM "br_8_50" service ("Bridge" protocol) created earlier using the Advanced Setup / WAN) menu. then click on the button to transfer this interface to the "Grouped Interfaces" area. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-112 Sagem Communications document. Reproduction and disclosure prohibited...
Page 149
Default "Group Name" associates the "Data" service with the interfaces by default (Wireless, Wireless_Guest, ENET1, ENET2, ENET3). the dedicated ATM interface nas_8_50 and the Ethernet interface ENET4 are associated with the "Video" service. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-113...
Page 150
5 - Information / Configuration To enable you to understand better, the following diagram shows the path of the "Video" and "Data" flows. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-114 Sagem Communications document. Reproduction and disclosure prohibited...
Summarises the main characteristics of the certificate. Type Indicates the status of the certificate (e.g.: request). Action Select the action from the list: view, load signed certificate, remove. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-115...
Enter the name of the organisation which owns the certificate State/Province Name Enter the name of the state of province Country/Region Name Select the country from the scroll down list SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-116 Sagem Communications document. Reproduction and disclosure prohibited...
Click on the Import Certificate button to display the following screen: Field Action Default Certificate Name Enter the name of the certificate Certificate Insert the certificate here Private key Insert the private key here SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-117...
CPE and the ACS. • Select the Trusted sub-menu in the Certificate menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-118 Sagem Communications document. Reproduction and disclosure prohibited...
Page 155
Default Certificate Name Enter the name of the certificate to be imported. Certificate Insert the certificate here. Private Key Insert the private key here. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-119...
Object: This menu is used to display all the parameters which concern the remote network. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-120 Sagem Communications document. Reproduction and disclosure prohibited...
Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-121...
Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-122 Sagem Communications document. Reproduction and disclosure prohibited...
Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-123...
Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-124 Sagem Communications document. Reproduction and disclosure prohibited...
Page 161
"Test Time (sec)" field, select the test time from the scroll down list. • Click on the button to run test. • Click on the button to shut window and return to the previous screen. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-125...
Object: This menu is used to display all the information concerning your router's routing. • Select the Route menu in the Advanced Status section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-126 Sagem Communications document. Reproduction and disclosure prohibited...
Address Resolution Protocol). This lets you find out the physical address of a computer's network card, corresponding to an IP address. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-127...
Object: This menu is used to display all the computers which obtained an IP address from the router's DHCP server. • Select the DHCP menu in the Advanced Status section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-128 Sagem Communications document. Reproduction and disclosure prohibited...
Only appear the MAC addresses (BSSIDs) of the computers associated with the router and/or authorized by this one to use your wireless network (see subsection 5.7.3 - MAC Filter). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-129...
This menu contains the following three sub menus: • Backup (see subsection 5.11.1.1), • Update (see subsection 5.11.1.2), • Restore Default (see subsection 5.11.1.3). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-130 Sagem Communications document. Reproduction and disclosure prohibited...
It is recommended to save the current configuration on your computer to a file • Select the Backup sub menu in the Settings menu of the Management section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-131...
Page 168
Click on the Save button to save the current configuration file, for example, on your computer. • Select the directory where you want to save the "backupsettings.conf" configuration file. The process takes a few seconds. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-132 Sagem Communications document. Reproduction and disclosure prohibited...
Select the configuration file then click on the Update Settings button to recover a configuration which has already been saved. The process takes around 2 minutes. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-133...
" " LED (PWR) then all the LEDs and the process for returning to the factory configuration starts. It lasts for around 2 minutes. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-134 Sagem Communications document. Reproduction and disclosure prohibited...
Object: This menu is used to view and/or configure the events which occur on your router. • Select the System Log menu in the Management section to display the following screen: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-135...
(see table in the next paragraph - "Configure System Log"). • Click on the Save button to save all the events allocated to the severity you configured. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-136 Sagem Communications document. Reproduction and disclosure prohibited...
5 - Information / Configuration Configure System Log • Click on the Configure System Log button to configure the events which occur on your router. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-137...
Page 174
"View System Log" button. The severities are classified in decreasing order of importance. • Emergency, • Alert, • Critical, • Error, • Notice, • Informational, • Debugging. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-138 Sagem Communications document. Reproduction and disclosure prohibited...
Page 175
Server UDP Port Enter the number of the port associated with the "Syslog" server. This field only appears when the mode selected is "Remote or "Both". SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-139...
The rights are Read / Write (RW). System Name Enter the name of the SNMP server. Sagem System Location Enter the place where is your SNMP server. unknown SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-140 Sagem Communications document. Reproduction and disclosure prohibited...
Page 177
Hereafter, an example of SNMP configuration: Field Action Read Community Iris (RO) Set Community Cyclamen (RW) System Name rose System Location France System Contact Myrouter@sagem/com Trap Manager IP 192.168.1.1 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-141...
Empty server. ACS User Name Enter the name of the user of the "ACS" admin server. ACS Password Enter the "ACS" server password. admin SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-142 Sagem Communications document. Reproduction and disclosure prohibited...
Page 179
User Name Connection Request Enter your password for your router. admin Password • Click on the button to launch the auto-configuration procedure of your router. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-143...
GMT (Greenwich Mean Time). Note: For these events to be displayed and/or saved at an effective date and time, you should check this box. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-144 Sagem Communications document. Reproduction and disclosure prohibited...
Page 181
GMT time to that Date Line West of the country where you live with the seasonal correction (Summer time or Winter time). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-145...
(WAN). Note: The ICMP service is always activated on the local network (LAN) and may be activated or deactivated on the remote network (WAN). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-146 Sagem Communications document. Reproduction and disclosure prohibited...
Field Action Default Access Control Mode Select Enable to activate the access control Box not mode or Disable to not activate it. checked SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-147...
Page 184
Click on the Add button to add an IP address. Note: From this address you may access the local management services when the access control is active. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-148 Sagem Communications document. Reproduction and disclosure prohibited...
New Password Enter your new password Confirm Password Confirm your new password Note: The password is a string of a maximum of 16 alphanumerical characters. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-149...
Throughout the download procedure (up to five minutes), you must: • not power down the router, • not disconnect from the ADSL line. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-150 Sagem Communications document. Reproduction and disclosure prohibited...
(sysinfo) with f24 type. • Select System Info menu in the Management section ; the following screen appears: SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited...
Page 188
Note: This file can be opened with different apllications as spreadsheet program, word processing for example Microsoft Excel, Microsoft Word, Notepad and so on. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 5-152 Sagem Communications document. Reproduction and disclosure prohibited...
Click on the Save/Reboot button to restart the router. The process takes around 1 minute. A countdown is displayed to tell the user how long is left to wait. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 5-153...
6. Internet access service This section covers of the introduction P6-2 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page 6-1...
Page 192
• the DNS addresses are correctly configured in each terminal. The router enables DNS queries to be relayed. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 6-2 Sagem Communications document. Reproduction and disclosure prohibited...
7. TV over ADSL service This section covers the introduction § 7.1 access to the optional TV over ADSL service § 7.2 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communication document. Reproduction and disclosure prohibited Page 7-1...
Note: In the example above, the ATM interface "ppp_8_35_1" is dedicated to data and the ATM interface "nas_8_50_1" is dedicated to video. configure "Port Mapping" in accordance with section 6.9.8. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 7-2 Sagem Communication document. Reproduction and disclosure prohibited...
You can download the new firmware to update your router as indicated in subsection 5.5.7 of the HTTP configurator. TR69 protocol Operators can use "TR69" protocol to upgrade the router's firmware from an HTTP or FTP server. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page 8-2 Sagem Communications document. Reproduction and disclosure prohibited...
States of Front panel LEDs, Data accessible by the configurator by "DSL Router" onboard HTTP of your router: • supervision of the router, • "Diagnostics" tool. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page A-2 Sagem Communications document. Reproduction and disclosure prohibited...
Ethernet port (ETH1, ETH2, ETH3 or ETH4) has detected a link with Lit on steady 10 Mbps device Amber Flickering Tx/Rx traffic at 10 Mbit/s No link detected on the Ethernet port SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page A-3...
Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed. Allows your router to be started. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page A-4 Sagem Communications document. Reproduction and disclosure prohibited...
(PASS in green, DOWN in orange and FAIL in red) and supplies the appropriate troubleshooting procedures. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page A-5...
Page 202
If you experience difficulties connecting to the Internet, we recommend that you restart your router (cf.A.6) or possibly re-establish the factory configuration (cf. § A.7). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page A-6 Sagem Communications document. Reproduction and disclosure prohibited...
Check that the delivered power cord is properly connected at one end to the mains power network. Check that the power connector is inserted correctly in the corresponding connector (power) of the router. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page A-7...
CD-ROM, or to enter again the ADSL connection data supplied by your Internet Service Provider (ISP) (see Internet Connection section - § 5.6). SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page A-8 Sagem Communications document. Reproduction and disclosure prohibited...
In the menu bar, select the "File" menu then deselect the "Work Offline" command. Click OK in the browser's "Address" field to display the home screen. When the router is installed, this box is checked. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page A-9...
2604/2644 product conforms to the requirements of European directives 1999/5/CE and the essential requirements of directives 2004/108/CE and 2006/95/CE. The EC déclaration of conformity for the SAGEM F@st 2604/2644 product is made within the framework of the R&TTE directive. Hazardous Primary Voltage circuit...
Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communications. Sagem Communications‘ aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.
Page 211
§ D.1 the characteristics of the different interfaces § D.2 environmental characteristics § D.3 the application and the protocols § D.4 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page D-1...
: 290 g Display Marking Abbreviation Meaning • Green Power LED • ADSL Green ADSL LED • WLAN Green WLAN LED Internet • Green/Red Internet LED SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page D-2 Sagem Communications document. Reproduction and disclosure prohibited...
EN 61000-3-3 voltage • Immunity EN 55024 Radio part forpour ISM band at 2.4 GHz Transmission 802.11g/b • ETR 300 328-2 Ed. Juillet 2000 SAGEM F@st™ 240x/244x Reference Manual - 288097371-02 Sagem Communications document. Reproduction and disclosure prohibited Page D-5...
RFC 2364 • PPP over ETH over ATM RFC 2516, RFC 1483/2684 • IP over ATM RFC 1483/2684 ETH over ATM • RFC 1483/2684 SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page D-6 Sagem Communications document. Reproduction and disclosure prohibited...
Page 217
From ETH, USB and WAN (with specific option) • Downloading of version Client by http mode • Telnet TR69 • Via a ACS server SAGEM F@st™ 240x/244x Reference Manual - 288097371-02 Sagem Communications document. Reproduction and disclosure prohibited Page D-7...
§ E.1 the default configuration for the local network (LAN) § 0 the default configuration for the local wireless network § E.3 (WLAN) SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page E-1...
Username Password can be different according to the ISP (Internet Service Provider). Default configuration for the local network(LAN) The following table gives the values of the principal LAN parameters of your SAGEM F@st 2604/2644 (ETH1 to ETH4) : LAN characteristics...
Annexe E - Configuration par défaut Default configuration for the local wireless network (WLAN) The following table supplies the principal default WLAN parameters of your SAGEM F@st 2604/2644. Wireless Characteristics (Wi-Fi) Value IP address 192.168.1.1/24 Enable Wireless Box checked SSID...
Page 222
Annexe E - Configuration par défaut SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page E-4 Sagem Communications document. Reproduction and disclosure prohibited...
F. Annex F - Glossary SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page F-1...
Page 224
Integrated Service Digital Network Internet Service Provider L2TP Layer 2 Tunneling Protocol Local Area Network Link Control Protocol Logical Link Control Medium Access Control Media Dependent Interface SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page F-2 Sagem Communications document. Reproduction and disclosure prohibited...
Page 225
Unspecified Bit Rate User Datagram Protocol UPnP Universal Plug and Plug Uniformed Resource Locator Unshielded Twisted Pair VBR-nrt Variable Bit Rate - non real time SAGEM F@st 3504/3544 Reference Manual - 253059461-A Sagem Communications document. Reproduction and disclosure prohibited Page F-3...
Page 226
Meshed network of information servers Wired Equivalent Privacy Weighted Fair Queuing Wi-Fi Wireless Fidelity (réseau sans fil) WLAN Wireless Local Area Network Wireless Protected Access SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page F-4 Sagem Communications document. Reproduction and disclosure prohibited...
The mains unit is connected to the equipment using the miniature fixed connector of the case. Contact No Signal Meaning Intérieur +12 V Connexion DC "+" Extérieur Masse Connexion DC "-" SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Page G-2 Sagem Communications document. Reproduction and disclosure prohibited...
Not connected Not connected The Ethernet port is self-detecting. You can use either straight or crossed cables. An emission or reception signal is detected automatically. SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A Sagem Communications document. Reproduction and disclosure prohibited Page G-3...
Page 232
Siège social : Le Ponant de Paris - 27, rue Leblanc - 75015 PARIS - FRANCE Tél. : +33 (0)1 58 11 77 00 - Fax : +33 (0)1 58 11 77 77 http://www.sagem-communications.com S.A.S au capital de 158 291 895 € - 440 294 510 RCS Paris...