Sagem F@ST 1500 Reference Manual
  1. Manuals
  2. Brands
  3. Sagem Manuals
  4. Network Router
  5. F@ST 1500
  6. Reference manual
Sagem F@ST 1500 Reference Manual

Sagem F@ST 1500 Reference Manual

Ieee 802.11g adsl router
Hide thumbs Also See for F@ST 1500:
Table of Contents

Advertisement

Quick Links

Download this manual
TM
SAGEM F@st
1500
TM
SAGEM F@st
1500WG
Reference Manual
288 053 220-03
August 2004 Issue
S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F@ST 1500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sagem F@ST 1500

Summary of Contents for Sagem F@ST 1500

  • Page 1 SAGEM F@st 1500 SAGEM F@st 1500WG Reference Manual 288 053 220-03 August 2004 Issue...
  • Page 2 It therefore reserves the right to change its documentation accordingly without notice. All the trade marks mentioned in this guide are registered by their respective owners: - SAGEM F@st™ is a registered trade mark of E. - Windows is a registered trade mark of Microsoft Corporation.

  • Page 3: Table Of Contents

    Phone Line Configuration 2.3.5 Attach to Your Network Using Ethernet Cabling 2.3.6 Connect the Power Adapter 2.4Powering up the SAGEM F@st™ 1500 ADSL router 3. Configuring Client Computer 3.1TCP/IP Configuration 3.2Configuring your Windows computer 3.2.1 On Windows 98 / Me 3.2.2...
  • Page 4 4. Configuring the SAGEM F@st™ 1500 ADSL router 4.1STATUS 4.2"SETUP WIZARD" menu 4.2.1 PPP Setting 4.2.2 Channel and SSID 4.2.3 4.2.4 Access Control 4.3SYSTEM 4.3.1 Time Settings 4.3.2 Password Settings 4.3.3 Configuration tools 4.3.4 Firmware Upgrade 4.3.5 Reset 4.4"WAN" menu 4.4.1...
  • Page 5 A. Appendix A - Troubleshooting B. Appendix B - Safety warnings Safety warnings B.1.1 Safety levels on the mains adapter unit B.1.2 Safety levels on the SAGEM F@st™ 1500 unit CE declaration of conformity C. Appendix C - CABLES Ethernet cable C.1.1 Specifications C.1.2...

  • Page 6: List Of Figures

    Figure C.1 - RJ-45 Ethernet Connector Pin Numbers Figure C.2 - RJ-11 Connector Pin Numbers Figure C.3 - RJ-11 Pinouts SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 0-4 List of figures...

  • Page 7: Introduction

    Applications of the SAGEM F@st the composition of the supply the IT prerequisites Reproduction and communication prohibited without the written permission of E 1500 router 1500 router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Section 1.1 Section 1.2 Section 1.3 Section 1.4 Section 1.5...

  • Page 8: Tm 1500Wg Adsl Router

    This device supports Internet access through an ADSL connection. Since many DSL providers use PPPoE or PPPoA to establish communications with end users, the SAGEM F@st 1500WG ADSL Router includes built-in clients for these protocols, eliminating the need to install these services on your computer.

  • Page 9: Virtual Server

    • Virtual Server If you have a fixed IP address, you can set the SAGEM F@st a virtual host for network address translation. Remote users access various services at your site using a constant IP address. Then, depending on the requested service (or port number), the...

  • Page 10: Composition Of The Supply

    The CD ROM contains: • the software for installing the four Ethernet (ETH) interfaces. • the SAGEM F@st™ 1500 User Guide in pdf file format. • the Acrobat Reader™ software for reading pdf files. Incomplete or If the equipment is received damaged or incomplete, contact the damaged supply supplier of your SAGEM F@st™...

  • Page 11: Prerequisites

    WEB browser (Internet Explorer, version 5 or above). a monitor with a minimum resolution of 1024 x 728 pixels. Before installing the SAGEM F@st™ 1500 router, we would advise you to uninstall any other modem or ADSL router. Reproduction and communication prohibited without the written permission of E 1500's HTTP/HTML configuration: SAGEM F@st™...
  • Page 12 1 - Introduction SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 1-6...

  • Page 13: Description And Physical Installation

    This chapter covers a description of the SAGEM F@st how to install the SAGEM F@st how to connect the ports of the SAGEM F@st how to power up the SAGEM F@st Reproduction and communication prohibited without the written permission of E...

  • Page 14: Hardware Description

    Package Contents list (see § 1.4). If any of the items are missing or damaged, contact your local distributor. Also be sure that you have all the necessary cabling before installing the SAGEM F@st ADSL Router. After installing the ADSL Router, refer to “Configuring the SAGEM F@st ADSL Router”...

  • Page 15: Front Panel

    2.1.1 Front panel From left to right, this comprises eight green supervisory LEDs, followed by the SAGEM logo, the meaning of which is given in the table below: Status ADSL Flashing WLAN Flashing ETHERNET On (4 LEDs) Flashing SAGEM F@st™ 1500 Reference Manual - 288053220-03...

  • Page 16: Rear Panel

    LAN2 LAN1 Directable antenna (180° rotation), not removable (only for the SAGEM F@st SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 2-4 Figure 2.2 - Rear Panel 1500 ADSL Router.

  • Page 17: Physical Installation

    Power supply source The SAGEM F@st™ 1500's mains adapter block must not be covered. The SAGEM F@st™ 1500 router is supplied with its own power supply adapter. It must not be used with any other adapter. This Class II adapter does not need to be earthed. The connection to the electrical network must comply with the information on its label.

  • Page 18: Desktop Installation

    2.2.2 Desktop Installation place the SAGEM F@st™ 1500 on its plastic stand fitted with four non-slip rubber feet. make sure that the various leads pass correctly through the cable guide to avoid any risk of tension or of dropping the unit.

  • Page 19: Settings And Connecting

    • Do not place the SAGEM F@st You should also remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you install the SAGEM F@st 2.3.3 Connect the ADSL Line Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to the ADSL port on your Sagem SAGEM F@st 1500 Router.

  • Page 20: Phone Line Configuration

    ADSL line to a data/voice splitter. In this case you can connect your phones and computer directly to the splitter as shown below: SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 2-8 Figure 2.3 - Installing with a Splitter...

  • Page 21: Installing A Splitterless Connection

    In this case you can connect your phones and computer directly to the incoming ADSL line, but you will have to add low-pass filters to your phones as shown below: Figure 2.4 - Installing without a splitter SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 2-9...

  • Page 22: Attach To Your Network Using Ethernet Cabling

    2.3.6 Connect the Power Adapter Plug the power adapter into the power socket on the rear of the SAGEM F@st Router, and the other end into a power outlet. Check the power indicator on the front panel is lit. If the power indicator is not lit, refer to “Troubleshooting”...

  • Page 23: Powering Up The Sagem F@St™ 1500 Adsl Router

    PWR LED will remain lit, the extreme right ETHERNET LED is slowly blinking, the ALM LED will come on and the WLAN LED (only for the SAGEM F@st™ 1500WG) will then come on if the wireless module is installed and active, and finally the ADSL LED will start blinking.
  • Page 24 2 - Description and physical installation SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 2-12...

  • Page 25: Configuring Client Computer

    TCP/IP Configuration the configuration of your Windows computer the configuration of your Mac computer Reproduction and communication prohibited without the written permission of E SAGEM F@st™ 1500 Reference Manual - 288053220-03 Section 3.1 Section 3.2 Section 3.3 Page 3-1...

  • Page 26: Tcp/Ip Configuration

    To access the Internet through the SAGEM F@st network settings of the computers on your LAN to use the same IP subnet as the SAGEM F@st 1500 ADSL Router. The default IP settings for the SAGEM F@st Router are: IP Address...

  • Page 27: Configuring Your Windows Computer

    4) In the TCP/IP window, select the IP Address tab. If “Obtain an IP address automatically” is already selected, your computer is already configured for DHCP. If not, select this option. Reproduction and communication prohibited without the written permission of E 3 - Configuring Client Computer SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 3-3...
  • Page 28 Click Yes and your computer will restart. TCP/IP Configuration Setting Primary DNS Server Secondary DNS Server Default Gateway Host Name SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-4 ____.____.____.____ ____.____.____.____ ____.____.____.____...

  • Page 29: Disable Http Proxy

    Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your web browser is disabled. This is so that your browser can view the SAGEM F@st The following steps are for Internet Explorer. Internet Explorer 1) Open Internet Explorer.
  • Page 30 3 - Configuring Client Computer SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-6...
  • Page 31 Obtain IP Settings from SAGEM F@st Now that you have configured your computer to connect to your SAGEM F@st Router, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from your SAGEM F@st that you have configured your computer correctly.

  • Page 32: On Windows Nt 4.0

    3 - Configuring Client Computer 3.2.2 On Windows NT 4.0 1) On the Windows desktop, click Start/Settings/Control Panel. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-8...
  • Page 33 7) Click the DNS tab to see the primary and secondary DNS servers. Record these values, and then click “Remove.” Click “Apply”, and then “OK. Reproduction and communication prohibited without the written permission of E 3 - Configuring Client Computer SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 3-9...

  • Page 34: Tcp/Ip Configuration Setting

    (refer to Internet Explorer on § 3.2.1). Obtain IP Settings from SAGEM F@st Now that you have configured your computer to connect to your SAGEM F@st Router, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from your SAGEM F@st that you have configured your computer correctly.
  • Page 35 192.168.2.1. These values confirm that your SAGEM F@st functioning. 4) Type “EXIT” and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the SAGEM F@st Router. Reproduction and communication prohibited without the written permission of E...

  • Page 36: On Windows 2000

    3.2.3 On Windows 2000 1) On the Windows desktop, click Start/Settings/Network and Dial-Up Connections. 2) Click the icon that corresponds to the connection to your SAGEM F@st Router. 3) The connection status screen will open. Click Properties. SAGEM F@st™ 1500 Reference Manual - 288053220-03...
  • Page 37 Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your web browser is disabled. This is so that your browser can view the SAGEM F@st (refer to Internet Explorer on § 3.2.1). Reproduction and communication prohibited without the written permission of E 3 - Configuring Client Computer 1500 ADSL Router’s HTML configuration pages.
  • Page 38 3 - Configuring Client Computer Obtain IP Settings from SAGEM F@st Now that you have configured your computer to connect to your SAGEM F@st Router, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from SAGEM F@st have configured your computer correctly.
  • Page 39 192.168.2.1. These values confirm that your SAGEM F@st functioning. 4) Type “EXIT” and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the SAGEM F@st Router. Reproduction and communication prohibited without the written permission of E...

  • Page 40: On Windows Xp

    3) The Network Connections window will open. Double-click the connection for this device. 4) On the connection status screen, click Properties. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-16...
  • Page 41 Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your web browser is disabled. This is so that your browser can view the SAGEM F@st (refer to Internet Explorer on § 3.2.1). Reproduction and communication prohibited without the written permission of E 3 - Configuring Client Computer 1500 ADSL Router’s HTML configuration pages.
  • Page 42 3 - Configuring Client Computer Obtain IP Settings from Sagem F@st1500 ADSL Router Now that you have configured your computer to connect to your SAGEM F@st Router, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from SAGEM F@st have configured your computer correctly.
  • Page 43 192.168.2.1. These values confirm that your SAGEM F@st functioning. Type “EXIT” and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the SAGEM F@st Router. Reproduction and communication prohibited without the written permission of E...

  • Page 44: Configuring Your Mac Computer

    Follow these instructions: 1) Pull down the Apple Menu 2) Double-click the Network icon in the Systems Preferences window. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-20 . Click System Preferences.
  • Page 45 4) Your new settings are shown on the TCP/IP tab. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your SAGEM F@st functioning. 5) Close the Network window. Now your computer is configured to connect to the SAGEM F@st 1500 ADSL Router.
  • Page 46 3 - Configuring Client Computer SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 3-22...

  • Page 47: Configuring The Sagem F@St™ 1500 Adsl Router

    4. Configuring the SAGEM F@st™ 1500 ADSL router This chapter covers Reproduction and communication prohibited without the written permission of E The SETUP WIZARD menu The ADVANCED menu Finding the MAC address of a Network Card SAGEM F@st™ 1500 Reference Manual - 288053220-03 Section 4.2...

  • Page 48: Navigating The Management Interface

    After you have configured TCP/IP on a client computer, you can configure the SAGEM @st™ 1500 ADSL Router using Internet Explorer 5.0 or above. To access the SAGEM F@st™ 1500 ADSL Router’s management interface, enter the default IP address of the SAGEM F@st™ 1500 ADSL Router in your web browser: http://192.168.2.1.
  • Page 49 4 - Configuring the SAGEM F@st™ 1500 ADSL router This section on the left of the Home screen contains the following menus: STATUS (see section 4.1), SETUP WIZARD (see section 4.2), SYSTEM (see section 4.3), WAN (see section 4.4), LAN (see section 4.5), WIRELESS (see section 4.6),...

  • Page 50: Status

    4 - Configuring the SAGEM F@st™ 1500 ADSL router STATUS The Status page displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clicking the button and choosing a location.
  • Page 51 Displays system IP settings, as well as DHCP Server and Firewall status. INFORMATION Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, and for the SAGEM F@st™ 1500 ADSL Router, as well as the hardware version and serial number. Security Log Displays illegal attempts to access your network.

  • Page 52: Setup Wizard" Menu

    Username Password Confirm Password This will automatically configure the SAGEM F@st™ 1500 ADSL Router with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP. Click “Next”, the router will try to connect to the Internet. SAGEM F@st™ 1500 Reference Manual - 288053220-03...

  • Page 53: Channel And Ssid

    Parameter Description ESSID Extended Service Set ID. The ESSID must be the same on the SAGEM F@st™ 1500 ADSL Router and all of its wireless clients. ESSID Broadcast Enable or disable the broadcasting of the SSID.

  • Page 54: Wep

    ASCII). To validate the WEP security protection, you should to set the same parameters for the SAGEM F@st™ 1500 ADSL Router and all your wireless clients. You may automatically generate encryption keys or manually enter the keys. To generate the key automatically with passphrase, check the Passphrase box, enter a string of characters.

  • Page 55: Access Control

    Once you have done your settings, click “Finish” to save these settings and quit the Setup Wizard. Your SAGEM F@st™ 1500 ADSL Router is now set up. Go to “Troubleshooting” on Appendice A, if you cannot make a connection to the Internet.

  • Page 56: System

    For accurate timing of log entries and system events, you need to set the time zone. Select your time zone from the drop down list. If you want to automatically synchronize the SAGEM F@st™ 1500 ADSL Router with a public time server, check the box to Enable Automatic Time Server Maintenance.

  • Page 57: Password Settings

    The default timeout is fixed to 10 minutes. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 SAGEM...

  • Page 58: Configuration Tools

    Router Choose a function and click Next. Backup allows you to save the SAGEM F@st™ 1500 ADSL Router’s configuration to a file. Restore can be used to restore the saved backup configuration file. Restore to Factory Defaults resets the SAGEM F@st™...

  • Page 59: Firmware Upgrade

    Use this screen to update the firmware or user interface to the latest versions. Download the upgrade file from the Sagem web site, and save it to your hard drive. In the Upgrade Target field, choose Firmware. Then click “Browse...” to look for the downloaded file. Click “Apply”.

  • Page 60: Wan" Menu

    4 - Configuring the SAGEM F@st™ 1500 ADSL router "WAN" menu Specify the WAN connection parameters provided by your Internet Service Provider (ISP). SAGEM F@st™ 1500 ADSL Router ways: ATM PVC (see section 4.4.1), Clone MAC (see section 4.4.2). SAGEM F@st™ 1500 Reference Manual - 288053220-03...

  • Page 61: Atm Pvc

    • PCR • SCR • MBS Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router Description Disables the ATM mode. Bridging: Bridging is a standardized layer 2 technology. It is...
  • Page 62 4 - Configuring the SAGEM F@st™ 1500 ADSL router IP assigned by ISP Click Yes or No to assign or no IP address to your ISP IP Address IP address of the ATM interface. Subnet Mask Subnet mask of the ATM interface.

  • Page 63: Clone Mac

    Some ISPs require you to register your MAC address with them. If this is the case, the MAC address of the SAGEM F@st™ 1500 ADSL Router must be changed to the MAC address that you have registered with your ISP.

  • Page 64: Lan

    IP Address The IP address of the SAGEM F@st™ 1500 ADSL Router. IP Subnet Mask The subnet mask of the network. DHCP Server The SAGEM F@st™ 1500 ADSL Router comes with the DHCP function. To dynamically assign an IP address to client PCs, enable this function.

  • Page 65: Dns

    4.5.1 Domain Name Servers (DNS) are used to map a domain name (e.g., www.sagem.com) with the IP address (e.g., 212.234.211.50). Your ISP should provide the IP address of one or more Domain Name Servers. Enter those addresses on this page, and click “Apply”.

  • Page 66: Wireless

    4 - Configuring the SAGEM F@st™ 1500 ADSL router Wireless SAGEM F@st™ 1500 ADSL Router wireless computers to communicate with each other. To configure this function, all you need to do is enable the wireless function, define the radio channel, the domain identifier, and the security options.

  • Page 67: Channel And Ssid

    Parameter Description SSID Service Set ID. The ESSID must be the same on the SAGEM F@st™ 1500 ADSL Router and all of its wireless clients. SSID Broadcast Enable or disable the broadcasting of the SSID.

  • Page 68: Access Control

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.6.2 Access Control Access Control allows users to define the outgoing traffic permitted or not-permitted through the Wi-Fi interface. The default is to permit all outgoing traffic. The following items are on the Access Control screen: Click Yes to turn on the filtering function, or No to disable this function.

  • Page 69: Security

    Security To make your wireless network safe, you should turn on the security function. The SAGEM F@st™ 1500 ADSL Router supports WEP (Wired Equivalent Privacy), WPA (Wi-Fi Protected), and 802.1x security mechanisms. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™...

  • Page 70: Wep

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.6.4 If you want to use WEP to protect your wireless network, you need to set the same parameters for the SAGEM F@st™ 1500 ADSL Router and all your wireless clients. Parameter WEP Mode Key Provisioning You may automatically generate encryption keys or manually enter the keys.

  • Page 71: Wpa

    Type in the key here. Group Key Re-Keying The period of renewing broadcast/multicast key. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router for the enterprise network with a RADIUS server. server.
  • Page 72 4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.6.6 802.1X If 802.1X is used in your network, then you should enable this function for the SAGEM F@st™ 1500 ADSL Router. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E...
  • Page 73 4 - Configuring the SAGEM F@st™ 1500 ADSL router Parameter 802.1X 802.1X Enable or disable this authentication function. Authentication Session Idle timeout Defines a maximum period of time for which the connection is maintained during inactivity. Re-Authentication Defines a maximum period of time for which the...

  • Page 74: Nat

    4 - Configuring the SAGEM F@st™ 1500 ADSL router Network Address Translation allows multiple users to access the Internet sharing one public IP. In this menu is included the following sub-menus: Address Mapping (see section 4.7.1), Virtual Server (see section 4.7.2), Special Application (see section 4.7.3),...

  • Page 75: Address Mapping

    Global IP field. Enter a range of internal IPs that will share the global IP into the “from” field. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 4-29...

  • Page 76: Virtual Server

    4.7.2 Virtual Server If you configure the SAGEM F@st™ 1500 ADSL Router as a virtual server, remote users accessing services such as web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the SAGEM F@st™...

  • Page 77: Special Application

    Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 4-31...

  • Page 78: Nat Mapping Table

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.7.4 NAT Mapping Table SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 4-32...

  • Page 79: Firewall

    Intrusion Detection (see section 4.8.5), DMZ (see section 4.8.6). Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router ’s firewall inspects packets at the application layer, protects against the following DoS attacks: IP Spoofing, SAGEM F@st™...

  • Page 80: Access Control

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.8.1 Access Control Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN interface. The default is to permit all outgoing traffic. The following items are on the Access Control screen:...

  • Page 81: Reproduction And Communication Prohibited Without The Written Permission Of E E E E Page

    4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 4-35...

  • Page 82: Mac Filter

    4.8.2 MAC Filter The SAGEM F@st™ 1500 ADSL Router can also limit the access of hosts within the local area network (LAN). The MAC Filtering Table allows the SAGEM F@st™ 1500 ADSL Router to enter up to 32 MAC addresses that are not allowed access to the WAN port.

  • Page 83: Url Blocking

    4.8.3 URL Blocking The SAGEM F@st™ 1500 ADSL Router allows the user to block access to web sites from a particular PC by entering either a full URL address or just a keyword. This feature can be used to protect children from accessing violent or pornographic web sites.

  • Page 84: Schedule Rule

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.8.4 Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the Schedule Rule page, and apply the rule on the Access Control page.

  • Page 85: Intrusion Detection

    Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 ADSL Router SAGEM F@st™ 1500 Reference Manual - 288053220-03 limits access for incoming ’s WAN port from...
  • Page 86 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 4-40...
  • Page 87 4 - Configuring the SAGEM F@st™ 1500 ADSL router When particular types of traffic are checked, only the particular type of traffic initiated from the internal LAN will be allowed. For example, if the user only checks “FTP Service” in the Stateful Packet Inspection section, all incoming traffic will be blocked except for FTP connections initiated from the local LAN.
  • Page 88 4 - Configuring the SAGEM F@st™ 1500 ADSL router 5) DoS Criteria and Port Scan Criteria Set up DoS and port scan criteria in the spaces provided (as shown below). Note: The firewall does not significantly affect system performance, so we advise enabling the prevention features to protect your network.

  • Page 89: Dmz

    Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03...

  • Page 90: Route

    4 - Configuring the SAGEM F@st™ 1500 ADSL router Route These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. In this menu is included the following sub-menus: Static Route (see section 4.9.1), RIP (see section 4.9.2), Routing Table (see section 4.9.3).

  • Page 91: Rip

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.9.2 SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 4-45...
  • Page 92 4 - Configuring the SAGEM F@st™ 1500 ADSL router Parameter Description General RIP Parameters RIP mode Globally enables or disables RIP. Auto summary If Auto summary is disabled, then RIP packets will include sub- network information from all subnetworks connected to the router.

  • Page 93: Routing Table

    1 to the metric value indicated in the update and enters the network in the routing table. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 4-47...

  • Page 94: Qos

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.10 QoS The QoS function allows users to classify traffic of applications and provides them differentiated services (Diffserv). The following items are on the "QoS Settings" screen: Parameter Enable or disable QoS module function Click Enable to activate QoS module function.
  • Page 95 4 - Configuring the SAGEM F@st™ 1500 ADSL router Click Allow users to configure guaranteed bandwidth of each Forwarding Group (EF, AF4x to AF1x and BE). The amount of guaranteed bandwidth for the Forwarding Groups must not be over 100%.

  • Page 96: Traffic Mapping

    4 - Configuring the SAGEM F@st™ 1500 ADSL router 4.10.1 Traffic Mapping No traffic Mapping was defined. • Click on the appears: Parameter Description Rule Name Enter a Rule Name. Traffic Type Select FTP, VoIP, E-MAIL, SNMP, TELNET, WWW, VPN, User define - TCP,...
  • Page 97 4 - Configuring the SAGEM F@st™ 1500 ADSL router • Click on the Almost fields are been informed, please inform these last ones: Parameter Local Address Remote Address In the fields Local Address or Remote Address, if you choose Mac addr, IP range, an other screen appears and you may enter the Mac address or a IP address range (or the IP address) on the local or remote part.

  • Page 98: Traffic Statistics

    4 - Configuring the SAGEM F@st™ 1500 ADSL router This button allows to modify all parameters of each traffic class. This button allows to delete a traffic class. This button allows to move up the matching priority of the selected rule.

  • Page 99: Advanced

    (from the central office to the customer site) than upstream. This section is used to display the ADSL operation type its status. Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 4-53...
  • Page 100 4 - Configuring the SAGEM F@st™ 1500 ADSL router Status The Status screen displays information on connection line status, data rate, operation data and defect indication, and statistics. Scroll down to view more information. SAGEM F@st™ 1500 Reference Manual - 288053220-03...
  • Page 101 4 - Configuring the SAGEM F@st™ 1500 ADSL router The following items are included on this information page: Parameter Description Status Line Status Shows the current status of the ADSL line connection. Data Rate Upstream Maximum upstream data rate. Downstream Maximum downstream data rate.

  • Page 102: Remote Management

    By default, management access is only available to users on your local network. However, you can also manage the SAGEM F@st™ 1500 ADSL Router from a remote host by entering the IP address of a remote computer on this screen. Check the Enabled check box, and enter the IP address of the Host Address and click “Apply”.

  • Page 103: Snmp

    A computer attached to the network, called a Network Management Station (NMS), can be used to access this information. Access rights to the agent are controlled by community strings. To communicate with the SAGEM F@st™ 1500 ADSL Router, the NMS must first submit a valid community string for authentication.

  • Page 104: Upnp

    4 - Configuring the SAGEM F@st™ 1500 ADSL router Up to five community names may be entered. SNMP Trap Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver.

  • Page 105: Finding The Mac Address Of A Network Card

    Run the command “/sbin/ifconfig.” The MAC address is the value after the word “HWaddr.” Reproduction and communication prohibited without the written permission of E 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page 4-59...
  • Page 106 4 - Configuring the SAGEM F@st™ 1500 ADSL router SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page 4-60...

  • Page 107: Appendix A - Troubleshooting

    A. Appendix A - Troubleshooting SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page A-1...
  • Page 108 IP address, subnet mask, and default gateway. • Check that you have a valid network connection to the SAGEM F@st ADSL Router and that the port you are using has not been disabled. • Check the network cabling between the management station and the...
  • Page 109 • You need to have the same security settings on the clients and the SAGEM F@st The wireless network is • Move your wireless PC closer to the SAGEM F@st often interrupted. find a better signal. If the signal is still weak, change the angle of the antenna.
  • Page 110 Appendix A - Troubleshooting SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page A-4...

  • Page 111: B. Appendix B - Safety Warnings

    B. Appendix B - Safety warnings This chapter covers Safety warnings CE declaration of conformity Reproduction and communication prohibited without the written permission of E Section B.1 Section B.2 SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page B-1...

  • Page 112: B.1 Safety Warnings

    Appendix B - Safety warnings B.1 Safety warnings The SAGEM F@st™ 1500 product is compliant with EN 60950, April 2002 edition. The safety levels in the sense of this standard are: B.1.1 Safety levels on the mains adapter unit Connectors...

  • Page 113: Ce Declaration Of Conformity

    03/05/1989 and 73/23/CEE dated 19/02/1973, and that it effectively uses the spectrum assigned for terrestrial or space radio communications. The CE declaration of conformity concerning the SAGEM F@st context of the R&TTE directive. Conformity is presumed by full compliance with the harmonized European standards:...
  • Page 114 Appendix B - Safety warnings SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page B-4...

  • Page 115: Appendix C - Cables

    C. Appendix C - CABLES This chapter covers Ethernet cable ADSL cable Reproduction and communication prohibited without the written permission of E Section C.1 Section C.2 SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page C-1...

  • Page 116: C.1.3 Rj-45 Port Connection

    Ethernet switch, use the cable type shown in the following table. Attached Device Port Type MDI-X SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page C-2 Cable Types and Specifications Type Max.

  • Page 117: C.1.4 Pin Assignments

    Reproduction and communication prohibited without the written permission of E Assignment1 End 2 1 (Tx+) 2 (Tx-) 3 (Rx+) 6 (Rx-) End 2 1 (Rx+) 2 (Rx-) 3 (Tx+) 6 (Tx-) SAGEM F@st™ 1500 Reference Manual - 288053220-03 Appendix C - Cable Page C-3...

  • Page 118: C.2.1 Specifications

    Appendix C - Cable C.2 ADSL Cable Use standard telephone cable to connect the RJ-11 telephone wall outlet to the RJ-45 ADSL port on the Sagem F@st1500 ADSL Router. DO NOT plug a phone jack connector into any RJ-45 port. C.2.1...

  • Page 119: C.2.2 Wiring Conventions

    Reproduction and communication prohibited without the written permission of E Figure C.3 - RJ-11 Pinouts Wire Color Black or White/Orange Red or Blue/White Green or White/Blue Yellow or Orange/White SAGEM F@st™ 1500 Reference Manual - 288053220-03 Appendix C - Cable Page C-5...
  • Page 120 Appendix C - Cable SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page C-6...

  • Page 121: Appendix D - Technical Specifications

    Electrical Characteristics the Soft Component Features the Radio Features the Environmental characteristics Reproduction and communication prohibited without the written permission of E Section D.1 Section D.2 Section D.3 Section D.4 Section D.5 SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page D-1...

  • Page 122: D.2 Electrical Characteristics

    Supports G.Lite ADSL: up to 1.5 Mbps downstream, up to 512 Kbps Upstream, Dying GASP support. Input Power 12 V / 1 A. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page D-2 •...

  • Page 123: Soft Component Features

    Diffserv PHBs : BE, AF1x, AF1x, AF1x, AF1x and EF, Diffserv code point (DSC) remarking, Layer 2/3 Multi-field Classification, Application Layer Classification. Reproduction and communication prohibited without the written permission of E Appendix D - Specifications SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page D-3...

  • Page 124: D.4 Radio Features

    13 channels (ETSI), 2 Channels (Spain), 4 Channels (France), 14 channels (Japan). Operating Channels IEEE 802.11g compliant: 13 channels (US, Canada, Europe, Japan). SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page D-4...
  • Page 125 802.11g - 36Mbps - (75 dBm), 802.11g - 48Mbps - (68 dBm), 802.11g - 54Mbps - (68 dBm). Reproduction and communication prohibited without the written permission of E Appendix D - Specifications SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page D-5...

  • Page 126: D.5 Environmental Characteristics

    CE, ETSI, R&TTE, FCC part 15 class B & FCC part 68, ETS 300 328, ETS 300 826. Safety CSA/NRTL (UL1950, CSA 22.2.950) GS (EN60950), CB (IEC60950), ITU K21. SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page D-6...
  • Page 127 RFC 1483 AAL5 Encapsulation, RFC 1661 PPP, RFC 1866 HTML, RFC 2068 HTTP, RFC 2364 PPP over ATM. Reproduction and communication prohibited without the written permission of E Appendix D - Specifications SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page D-7...
  • Page 128 Appendix D - Specifications SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page D-8...

  • Page 129: E. Appendix E - Default Configuration

    Reproduction and communication prohibited without the written permission of E SAGEM F@st™ 1500 Reference Manual - 288053220-03 Section E.1 Section E.2 Section E.3...

  • Page 130: Default User Name And Password

    Appendix E - Default configuration This section gives the default factory settings for the SAGEM F@st™ 1500. The SAGEM F@st™ 1500 is set to "Router" mode by default. These default settings can be modified by a special pre-configuration of the SAGEM F@st™...

  • Page 131: Sagem F@St™ 1500 Reference Manual - 288053220-03

    Note: The user can revert to the default configuration via the HTTP interface. Reproduction and communication prohibited without the written permission of E Appendix E - Default configuration Automatic negotiation 1500 Enabled Disabled 896 kbit/s 8160 kbit/s Multimode Simple latency (fast or interleaved) SAGEM F@st™ 1500 Reference Manual - 288053220-03 Page E-3...

  • Page 132: Reproduction And Communication Prohibited Without The Written Permission Of E E

    Appendix E - Default configuration SAGEM F@st™ 1500 Reference Manual - 288053220-03 Reproduction and communication prohibited without the written permission of E Page E-4...
  • Page 134 Tél. : +33 1 40 70 63 63 - Fax : +33 1 40 70 66 40 http://www.sagem.com E - Société anonyme à directoire et conseil de surveillance au capital de 36 405 229 € - Siège social : 27, rue Leblanc - 75512 PARIS CEDEX 15 - 562 082 909 R.C.S. PARIS...

This manual is also suitable for:

F@st 1500wg

Table of Contents