Sagem F@st 1704 Reference Manual
Hide thumbs Also See for F@st 1704:
Table of Contents

Advertisement

TM
SAGEM F@st
1704
Reference Manual
Edition of October 2009
253 272 861-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F@st 1704 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sagem F@st 1704

  • Page 1 SAGEM F@st 1704 Reference Manual Edition of October 2009 253 272 861-A...
  • Page 3: Guide To Symbols Used In This Manual

    It therefore reserves the right to modify its documentation accordingly without notice. All brands mentioned in this guide are registered by their respective owners: - SAGEM F@st™ is a registered brand of Sagem Communications SAS. - Windows and Internet Explorer are registered brands of Microsoft Corporation.
  • Page 4: How Should The Document Be Used

    CE compliance declaration Annex B Annex C Environment Annex D Technical Characteristics Default configuration Annex E Annex F Glossary Annex G Connection technology Page 0-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 5: Table Of Contents

    Configuring as a DHCP client Status of the DHCP server Data of the DHCP client 5. Information / Configuration Accessing the welcome screen SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 0-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 6 5-82 5.7.13 DNS Proxy 5-83 5.7.14 Interface Grouping 5-84 5.7.15 LAN Ports 5-87 5.7.16 Certificate 5-88 5.7.16.1 Local 5-88 5.7.16.2 Trusted CA 5-91 Page 0-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 7 A.5.1 The "ADSL" LED blinks slowly A.5.2 "Wi-Fi" LED off A.5.3 All LEDs are off Restarting your router Resetting factory configuration Offline mode SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 0-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 8 G. Annex G - Connector Technology Pinouts of the LINE connector Pinouts of the PWR connector Pinouts of the LAN1, LAN2, LAN3 and LAN4 connectors Page 0-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 9: List Of Figures

    List of figures Figure 1.1 - Supervising your router ......................1-2 Figure 2.1 - Overview of case........................2-2 Figure 2.2 - Interconnection of ports of SAGEM F@st 1704..............2-5 Figure 2.3 - ADSL line / Power Supply Connection ................... 2-7 SAGEM F@st™...
  • Page 10 Page 0-8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 11: Introduction

    This section covers presentation of the SAGEM F@st 1704 router § 1.1 composition of the packaging § 1.2 required hardware and software § 1.3 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 1-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 12: Presentation

    1 - Introduction Presentation This reference manual is dedicated to the SAGEM F@st 1704 equipment. This equipment is a router which gives users, broadband Internet access from their computer or their games console by various Ethernet (10 or 100 BASE-T) or Wi-Fi (IEEE 802.11g) interfaces via an ADSL/ADSL2/ ADSL2+ network.
  • Page 13 Multi-VC ATM and ATM Quality of service (CBR, UBR, VBR), UpnP, TR069, QoS, Upgrade Firmware (Local and Remote), Backup/Restore and Upgrade configuration file (Local and Remote). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 1-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 14: Composition Of Router Pack

    CE declaration of the router. Note Incomplete or damaged supply. If on its receipt the equipment is damaged or incomplete, contact your supplier. Page 1-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 15: Minimum) Prerequisites

    Standard pack (see annex G for use of Wi-Fi). Note Before installing the router, we advise you to uninstall any modem or other router (for example, an ADSL router). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 1-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 16 1 - Introduction Page 1-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 17: Description And Connection Of Router

    § 2.1 connecting the ports of your router § 2.2 installing your router § 2.3 installation safety instructions § 2.4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 2-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 18: Description

    2 - Description and connection of router 2.1 Description Figure 2.1 gives an overview of a router SAGEM F@st 1704. Figure 2.1 - Overview of case This case consists principally of a lid and a base. Inside is a printed circuit equipped with electronic components.
  • Page 19: Connectors

    Note: To prevent an accidental loss of configuration, the router is reset relative to the other elements. This button allows the router to switch to easy-pairing mode. WLAN/WPS Page SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 20: Leds

    Ethernet port has detected a link with 100 Mbps device Green steady to 4) Green blinking Tx/Rx traffic at 100 Mbps Wi-Fi deactivated Green steady WI-Fi activated WLAN Green blinking Wi-Fi Tx/Rx Page 2-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 21: Connecting The Ports Of Your Router

    2 - Description and connection of your router 2.2 Connecting the ports of your router Figure 2.2 - Interconnection of ports of SAGEM F@st 1704 Page SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 22: Installing Your Sagem F@St Tm 1704

    Connect one end of the RJ11/RJ11 cable supplied with the equipment to the LINE socket of your router. Connect the other end of the cable as shown in the Figure 2.3. Page 2-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 23: Figure 2.3 - Adsl Line / Power Supply Connection

    2 - Description and connection of your router Figure 2.3 - ADSL line / Power Supply Connection Page SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 24: Connecting To Your Computer

    Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the Ethernet fixed connector (marked LAN1, LAN2, LAN3 or LAN4) of your router. Connect the other end of the cable to your computer. Page 2-8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 25: Connecting The Wi-Fi Interface Of Your Router To Your Computer

    This key should only be connected to your computer during installation of the Wi-Fi drivers (standard 802.11b/g)(see Quick Installation Guide). Note You can also use the Wi-Fi adapter incorporated in your computer. Page SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 26: Connecting The Ethernet Interface Of Your Router To Your Tv Decoder

    Ethernet fixed connector (marked LAN1, LAN2, LAN3 or LAN4) of your router. Connect the other end of the cable to a TV decoder. Note For connection to the decoder, refer to the manufacturer's documentation. Page 2-10 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 27: Installation Safety Instructions

    Never open the casing. This must be done only by qualified personnel approved by your supplier. • Do not use liquid or aerosol cleaning agents. Page SAGEM F@st™ 1704 Reference Manual - 253272861-A 2-11 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 28 2 - Description and connection of router Page 2-12 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 29: Installing And Configuring The Sagem F@St

    3. Installing and configuring the SAGEM F@st 1704 router SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 3-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 30 3 - Installing and configuring the SAGEM F@st 1704 router For the installation of the SAGEM F@st 1704, please refer to the Quick Installation Guide of this product. Page 3-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 31: Configuration Of Network Parameters

    DHCP client Page 4-3 reading status of the DHCP server Page 4-4 reading data of the DHCP client Page 4-5 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 4-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 32 IP address in the configuration range defined by the DHCP server. Configuration as a DHCP client is the more commonly used solution. Page 4-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited.
  • Page 33: Configuring As A Dhcp Client

    Select the General tab, then the case "Obtain an IP address automatically" and the case "Obtain the addresses of the DNS servers automatically". Click the OK button to confirm your choice. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 4-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 34: Status Of The Dhcp Server

    Leased Time (hour) Displays the period (in hours) for obtaining an IP address for a terminal. Page 4-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited.
  • Page 35: Data Of The Dhcp Client

    Click on Start > Run, enter cmd and then click OK. The command prompt screen appears. Enter ipconfig /all (or ipconfig/all) then press Enter. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 4-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 36 4 - Configuration of network parameters Page 4-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited.
  • Page 37: Information / Configuration

    § 5.6 The "Advanced Setup" section § 5.7 The "Wireless" section § 5.8 The "Diagnostics" section § 5.9 The "Management" section § 5.10 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 38: Accessing The Welcome Screen

    The router's DHCP server function is activated by default with an address range defined as indicated in subsection.5.7.3. To access the configurer, proceed as follows: Click on Start > All Programs > SAGEM F@st 1704 > In the login screen that appears, enter your identification information. By default, the identification information is:...
  • Page 39 5.5 to 5.9). Important You can modify the password to access your router's configuration tool to optimise the safety of your network. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 40: Recommendations

    All the fields in the different screens are explained in a table. Page 5-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 41: Adsl Connection Status

    Router rebooting Router is rebooting Green Connected The Internet account is configured Yellow Waiting for ISP ADSL line synchronising Access denied Incorrect Internet account SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 42: Device Info

    In the Device Info menu, select Summary. The following screen opens: Note This screen also appears in the welcome screen (see subsection 5.1). Page 5-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 43: Wan

    This menu is used to display all the parameters which concern the remote network. • In the Device Info menu, select WAN. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-7 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 44: Statistics

    In the Device Info menu, select Statistics then select LAN. The following screen opens: • Click on the Reset Statistics button to reset statistics. Page 5-8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 45: Wan Service

    In the Device Info menu, select Statistics then select WAN Service. The following screen opens: • Click on the Reset Statistics button to reset statistics. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-9 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 46: Xtm

    In the Device Info menu, select Statistics then select xTM. The following screen opens: • Click on the Reset button to reset statistics. Page 5-10 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 47: Xdsl

    In the Device Info menu, select Statistics then select xDSL. The following screen opens: • Click on the Reset Statistics button to reset statistics. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-11 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 48 Click on the Start button to run the test. • Click on the Close button to close the window and return to the previous screen. Page 5-12 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 49: Route

    This menu is used to display all the information concerning your router's routing. • In the Device Info menu, select Route. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-13 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 50: Arp

    Address Resolution Protocol). This lets you find out the physical address of a computer's network card, corresponding to an IP address. • In the Device Info menu, select ARP. The following screen opens: Page 5-14 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 51: Dhcp

    This menu is used to display all the computers which obtained an IP address from the router's DHCP server. • In the Device Info menu, select DHCP. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-15 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 52: Internet Connection

    In the supervision box, the “Internet” indicator switches from green to yellow and the message “Connected” is replaced by “Waiting for ISP”. • On the front panel of the router, the indicator @ goes out. Page 5-16 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 53: Advanced Setup

    Quality of Service only appears checked "Enable Quality Of Service" box in the WAN interface configuration screen (see Advanced Setup>WAN Service – subsection 5.7.2>Add). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-17 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 54: Layer2 Interface

    Type of service adapter to the traffic. Connection Connection mode (Default mode, VLAN MUX Mode or MSC Mode). Mode Status (Enabled or Disabled) of the Quality of Service function. Page 5-18 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 55: Add

    Non Realtime VBR : Variable Bit Rate Realtime VBR : Variable Bit Rate This value is delivered to you by your Internet Service Provider (ISP). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-19 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 56 This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type of service is selected. These fields only appear when the "Non Realtime VBR" or "Realtime VBR" type of service is selected. Page 5-20 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 57: Wan Service

    (LAN) and interaction between the router and the local network hosts. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-21 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 58: Add

    Therefore, and for more clarity, each type of protocol will be dealt with separately (screens + associated summary tables) below. Page 5-22 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 59: Ethernet Over Atm - Ppp Over Ethernet (Pppoe)

    Click on the Next button to continue configuring the WAN service. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-23 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 60 If there is no traffic for a certain period of time, the PPPoE session is interrupted. This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). Page 5-24 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 61 This field only appears when the “Enable IPv6 for this service” feature is activated (box checked). These fields only appear when the “Use Static IPv6 Address” field is activated (box checked). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-25 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 62 Secondary DNS server Enter a secondary DNS server address. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. Page 5-26 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 63 Quality of Service Displays the status of the Quality of Service function: Enabled • Click on the Apply/Save button to confirm the new WAN service. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-27 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 64: Ethernet Over Atm - Ip Over Ethernet (Ipoe)

    Click on the Next button to continue configuring the WAN service. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode. Page 5-28 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 65 WAN IP Address Enter the static IP address. WAN Subnet Mask Enter the subnet mask. WAN gateway IP Enter the gateway IP address. address SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-29 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 66 Select a preferred wan interface as the system default gateway. • Click on the Next button to continue configuring the remote network (WAN) in IPoE mode. Page 5-30 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 67 Secondary DNS server Enter a secondary DNS server address. • Click on the Next button to continue configuring the remote network (WAN) in IPoE mode. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-31 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 68 Quality Of Service Displays the status of the Quality Of Service function: Enabled • Click on the Apply/Save button to confirm the new WAN service. Page 5-32 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 69: Ethernet Over Atm - Bridging

    Click on the Next button to continue configuring the remote network (WAN) in Bridge mode. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-33 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 70 Quality Of Service Displays the status of the Quality Of Service function: Enabled • Click on the Apply/Save button to confirm the new WAN service. Page 5-34 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 71: Ppp Over Atm (Pppoa)

    Protocol_VPI_ Index _ VCI For example: pppoa_0_0_35. Note: You may enter another service name. • Click on the Next button to continue configuring the WAN service. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-35 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 72 1 and 4320 (i.e. 72 hours). This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). Page 5-36 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 73 Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. This field only appears when the "Use Static IPv4 Address" field is activated (box checked). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-37 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 74 Secondary DNS server Enter a secondary DNS server address. • Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. Page 5-38 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 75 Quality of Service Displays the status of the Quality of Service function: Disabled. • Click on the Apply/Save button to confirm the new WAN service. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-39 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 76: Ip Over Atm (Ipoa)

    Protocol_VPI_ Index _ VCI For example: ipoa_0_0_35. Note: You may enter another service name. • Click on the Next button to continue configuring the WAN service. Page 5-40 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 77 Enter a subnet mask. WAN Subnet Mask 0.0.0.0 • Click on the Next button to continue configuring the remote network (WAN) in IPoA mode. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-41 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 78 Select a preferred wan interface as the system default gateway. • Click on the Next button to continue configuring the remote network (WAN) in IPoA mode. Page 5-42 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 79 Quality of Service Displays the status of the Quality of Service function: Disabled. • Click on the Apply/Save button to confirm the new WAN service. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-43 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 80: Lan

    Check the box to activate the LAN side Enable LAN side firewall Not checked firewall. These fields only appear when the “Enable IGMP Snooping” field is activated (box checked). Page 5-44 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 81 (LAN). These fields only appear when the "Configure the second IP Address and Subnet Mask for LAN interface" field is activated (box checked). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-45 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 82: Ipv6 Lan Config

    Check the box if you wish the MLD snooping runs Blocking Mode Not checked in blocking mode. These fields only appear when the “Enable MLD Snooping” field is activated (box checked). Page 5-46 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 83: Nat

    (WAN) to computers on the local network (LAN) via the Internal Ports. • In the Advanced Setup menu, select NAT then select Virtual Servers. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-47 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 84 Click on the Add button; the following screen appears: Proceed as follows: • Select the required WAN interface in the Use Interface list. Page 5-48 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 85 The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569 (WAN side) and via the internal ports 3568 and 3569 (LAN side). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-49 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 86: Port Triggering

    Port Range: A port range contains a Start port and an End port. Note: A single port is characterised by an identical start port and end port. WAN Interface WAN Interface used. Page 5-50 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 87 Enter the name of your own application. • Fill in the Trigger Port Start, Trigger Port End, Open Port Start, Open Port End and Protocol fields. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-51 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 88 Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of port range 3100 to 3999 for your computer to access this service. Page 5-52 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 89: Dmz Host

    Note: Click on the Save/Apply button to take account of the address or its erasure. Note The DMZ zone is deactivated by default. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-53 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 90: Security

    Source IP address / Subnet mask. Source port Source Port Dest. Address / Mask Destination IP address / Subnet mask. Dest. Port Destination port. Page 5-54 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 91 Enter a "Destination" port (WAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-55 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 92 By default, all the incoming data is refused when the Firewall is activated. • In the Advanced Setup menu, select Security > IP Filtering >Incoming. The following screen opens: Page 5-56 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 93 Check the box to select the displayed interface. Checked br0/br0 Check the box to select the displayed interface. Checked SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-57 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 94: Parental Control

    This menu is used to create and manage access time restriction for LAN devices which are connected to the router. • In the Advanced Setup menu, select Parental Control. The following screen opens: Page 5-58 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 95 Start Blocking Time Enter the required blocking start hour (for example 08:00). Enter the required blocking end hour (for example 20:00). End Blocking Time SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-59 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 96: Quality Of Service

    The quality of service is only significant if all the traffic (data, video) is greater than the up rate of the ADSL line. • In the Advanced Setup menu, select Quality of Service. The following screen opens: Page 5-60 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 97 : Routers mark Routing traffic to CS6, CS7 (111000) Note: This drop-down list is present only if the box Enable Qos is checked. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-61 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 98: Queue Config

    DSL Latency PTM Priority PTM priority Enable QoS enabled or disabled for this interface. Note: This status can be amended starting from this window. Page 5-62 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 99 • 2: Medium priority for this queue, • 3: Low priority for this queue. Note: A high priority leads to low packet loss. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-63 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 100: Qos Classification

    • In the Advanced Setup menu, select Quality of Service then select QoS Classification. The following screen opens: Page 5-64 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 101 Priority field 802.1P (value between 0 and 7). VlanID Tag Enable QoS enabled or disabled for this traffic class. Note: This status can be amended starting from this window. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-65 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 102 5 - Information / Configuration • Click on the Add button to display the following screen: Page 5-66 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 103 Select Blank or a priority value between 0 and 7 from the scroll down list. Tag VLAN ID Enter a value from 0 to 4094. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-67 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 104: Routing

    Select a preferred wan Select the interface you want to use from the scroll down. interface as the system default IPv6 gateway Page 5-68 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 105: Static Route

    Field Meaning Destination Remote network IP address Subnet Mask Remote subnet mask Gateway Default gateway of the remote network Interface Remote network interface SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-69 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 106 Subnet Mask Enter the remote subnet mask. Use Interface Select the interface you want to use from the scroll down list (pppoa_0_8_35 for example). Page 5-70 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 107: Policy Routing

    Meaning Policy name Policy Name Source IP Source IP address LAN Port Nature of the LAN port Interface used Default gateway Default GW SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-71 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 108 Select the interface you want to use from the scroll down list (pppoa_0_8_35 for example). Default Gateway Enter the default gateway IP address. Page 5-72 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 109: Rip

    (silent mode) Enabled Check the box to activate the "RIP" function on Not checked the corresponding interface. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-73 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 110: Ipv6 Static Route

    The following screen opens: Field Meaning Destination Remote network IPv6 address Prefix Length Prefix length Gateway IPv6 gateway of the remote network Remote network interface Interface Page 5-74 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 111 Enter the subnet prefix length. Gateway IPv6 Address Enter the IPv6 address of the gateway. Interface Select the interface you want to use from the scroll down. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-75 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 112: Dns

    DNS IP address addresses. checked Primary DNS server Enter a primary DNS server address. Secondary DNS server Enter a secondary DNS server address. Page 5-76 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 113: Dynamic Dns

    Refer to the next subsection (Add) for detailed information on the fields of the table. Note The "Service" field is automatically filled by the system in "dyndns". SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-77 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 114 Enter the account name supplied to you by the dynamic DNS Username provider. Password Enter the account password provided to you by the dynamic DNS provider. Page 5-78 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 115: Dsl

    Phone line pair • Check the boxes according to the characteristics of your line. Field Default value Inner pair Checked Outer pair Not checked SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-79 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 116 Click on the Advanced Settings button to display the following screen: Field Default value Normal Checked Reverb Not checked Medley Not checked No retrain Not checked Not checked Page 5-80 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 117 All the tones are selected by default. To select a tone, simply check the associated box. To unselect a tone, simply leave its associated box empty. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-81 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 118: Upnp

    In the Advanced Setup menu, select Upnp. The following screen opens: • To enable Upnp protocol, check the box. To disable it, uncheck the box. Page 5-82 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 119: Dns Proxy

    Hostname of the Default hostname of the modem. MyRouter modem Domain name of the Default domain name of the LAN network. Home LAN network SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-83 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 120: Interface Grouping

    It corresponds to a "Bridge" ATM interface. Note By default, all the interfaces are dedicated to data and are associated with the first VC (Virtual Channel) existing or created. Page 5-84 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 121 Interfaces area to the Grouped LAN Interfaces area. Transfer the interfaces selected in the Grouped LAN Interfaces area to the Available LAN Interfaces area. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-85 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 122 5 - Information / Configuration To enable you to understand better, the following diagram shows the path of the "Video" and "Data" flows. Page 5-86 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 123: Lan Ports

    When the box is checked, these ports are independently seen but a fall of the performances of the transfers between ports is noted. By default, this feature is disabled (box not checked). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-87 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 124: Certificate

    Summarises the main characteristics of the certificate. Type Indicates the status of the certificate (e.g.: request). Action Select the action from the list: view, load signed certificate, remove. Page 5-88 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 125: Create Certificate Request

    Enter the name of the organisation which owns the certificate. State/Province Name Enter the name of the state or province. Country/Region Name Select the country from the scroll down list. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-89 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 126: Import Certificate

    Click on the Import Certificate button to display the following screen: Field Action Certificate Name Enter the name of the certificate. Certificate Insert the certificate here. Private key Insert the private key here. Page 5-90 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 127: Trusted Ca

    TR-69 (in SSL mode), enable the mutual authentication of the CPE and the ACS. • In the Advanced Setup menu, select Certificate then Trusted CA. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-91 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 128 Click on the Import Certificate button to display the following screen: Field Action Certificate Name Enter the name of the certificate. Certificate Insert the certificate here. Page 5-92 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 129: Wireless

    Important These menus must only be accessed/modified by experienced users. 5.8.1 Basic • In the Wireless menu, select Basic. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-93 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 130: Wireless - Basic

    The router may or may not be secured, at the request of the customer. This level of security is indicated on the label pasted to the box. This choice will modify the Wireless configuration screen Page 5-94 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 131: Security

    The WPA encryption mode is the most robust and the best adapted to correctly securing your wireless network. • In the Wireless menu, select Security. The following screen opens: SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-95 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 132 Select from the scroll down list: Disabled Encryption • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection WEP). Page 5-96 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 133: Network Authentication

    No restrictions concerning security are demanded. In this authentication mode, only the WEP key may be used to encrypt data. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-97 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 134 (LAN) or over Internet (WAN) using Internet Explorer 5.0 or above. Page 5-98 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 135 Enter the encryption on the key you 12345678901234 selected in the "Current Key". This field is empty or displays the key [Not modifiable] value entered earlier (greyed out) SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-99 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 136 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. Page 5-100 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 137 Select from the scroll down list: WEP Encryption Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-101 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 138 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. Page 5-102 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 139 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-103 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 140 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. Page 5-104 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 141 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-105 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 142: Mac Filter

    • Denied: Refuses computers whose MAC address is in the list to use your wireless network. Page 5-106 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 143 (MAC Restrict Mode) “Allow” to authorize only the computers whose MAC address appears in the list to be connected to your router. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-107 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 144: Advanced

    (router) which will emit the strongest signal. Conform to the CE Declaration of conformity / Radio rules list in appendix B to paragraph B.2. Page 5-108 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 145 (g and b for example) or Off to improve the quality only on the 802.11g environments but degrade it on other environments (802.11b for example). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-109 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 146 (20%, 40 %, 60 %, 80 % or 100 %) Power at which you want to transmit. Note: The power rate will be selected according to your environment. Page 5-110 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 147: Station Info

    Only appear the MAC addresses (BSSIDs) of the computers associated with the router and/or authorized by this one to use your wireless network (see subsection 5.8.3 - MAC Filter). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-111 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 148: Diagnostics

    Click on Test to check the problem is solved and resume the connection tests. To access the Diagnostic tool: • Select the Diagnostics menu. Page 5-112 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 149: Management

    This menu contains the following three sub menus: • Backup (see subsection 5.10.1.1) • Update (see subsection 5.10.1.2) • Restore Default (see subsection 5.10.1.3) SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-113 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 150: Backup

    Click on the Save button to save the current configuration file, for example, on your computer. • Select the directory where you want to save the "backupsettings.conf" configuration file. Note The process takes a few seconds. Page 5-114 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 151: Update

    Select the configuration file then click on the Update Settings button to recover a configuration which has already been saved. Note The process takes around 2 minutes. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-115 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 152: Restore Default

    It lasts for around 2 minutes. Once the restore performed, the Internet Connection menu appears. Refer to paragraph 5.6. Page 5-116 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 153: System Log

    Click on the View System Log button to display the events with the severity you configured (see table in section Configure System Log). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-117 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 154: Configure System Log

    View System Log button. The displayed events are classified in decreasing order of importance. Page 5-118 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 155 Enter the number of the port associated with the "Syslog" Port server. These fields only appear when the mode selected is "Remote or "Both". SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-119 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 156: Client

    Enter your password for your router. admin Password • Click on the Get RPCMethods button to launch the auto-configuration procedure of your router. Page 5-120 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 157: Internet Time

    (GMT+1 - Paris for example) to adjust the GMT time to that of Pacific Time, the country where you live with the seasonal correction Tijuana (Summer time or Winter time). SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-121 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 158: Access Control

    Enter your new password Confirm Password Confirm your new password Note The password is a string of a maximum of 16 alphanumerical characters. Page 5-122 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 159: Update Software

    Throughout the download procedure (up to five minutes), you must: - not power down the router - not disconnect from the ADSL line. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-123 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 160: Reboot

    Click on the Reboot button to restart the router. Note The process takes around 1 minute. A countdown is displayed to tell the user how long is left to wait. Page 5-124 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 161: Internet Access Service

    6. Internet access service This section covers description of the Internet access service P6-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 6-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 162 • the DNS addresses are correctly configured in each terminal. The router enables DNS queries to be relayed. Page 6-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 163: Tv Over Adsl Service

    7. TV over ADSL service This section covers the introduction § 7.1 access to the optional TV over ADSL service § 7.2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 7-1 Sagem Communication SAS document. Reproduction and disclosure prohibited...
  • Page 164: Introduction

    In the example above, the ATM interface "ppp_8_35_1" is dedicated to data and the ATM interface "nas_8_50_1" is dedicated to video. • configured accordingly “Port Mapping" in Advanced Setup (see section 5). Page 7-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communication SAS document. Reproduction and disclosure prohibited...
  • Page 165: Updating The Firmware

    8. Updating the firmware This section covers setting up the download. P8-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 8-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 166 HTTP configuration tool (see section 5). TR69 protocol Operators can use "TR69" protocol to upgrade the router's firmware from an HTTP or FTP server. Page 8-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 167: A. Annex A - Troubleshooting

    "Diagnostics" tool § A.4 interpreting the lights § A.5 reinitialising your router § A.6 resetting factory configuration § A.7 Offline connection mode § A.8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page A-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 168: Annex A - Troubleshooting

    LEDs on the front panel of the router. • the HTTP configuration tool. For step-by-step and advanced problem-solving procedures, use the Diagnostic tool available in the HTTP configuration tool. Page A-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 169: Front Panel Leds

    Green steady (1 to 4) Green blinking Tx/Rx traffic at 100 Mbps Wi-Fi deactivated Green steady WI-Fi activated WLAN Green blinking Wi-Fi Tx/Rx SAGEM F@st™ 1704 Reference Manual - 253272861-A Page A-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 170: Supervising Your Router

    Router rebooting Router is rebooting Green Connected The Internet account is configured Yellow Waiting for ISP ADSL line synchronising Access denied Incorrect Internet account Page A-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 171: Diagnostics Tool

    Internet may not be prejudiced. For example if you do a "Ping" either to an ATM OAM F5 segment or to a DNS primary address. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page A-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 172 Internet, we recommend that you restart your router (cf.A.6) and eventually reset the factory configuration (cf. § A.7). You will then need to re-configure your router as a first-time setup. Page A-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 173: Interpreting The Leds

    Check that the delivered power cord is properly connected at one end to the mains power network. Check that the power connector is inserted correctly in the corresponding connector (power) of the router. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page A-7 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 174: Restarting Your Router

    Press and hold for about 10 seconds the Reset button located on the rear panel of the router. • In the HTTP configuration tool, select Management > Settings > Restore default. Page A-8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 175: Offline Mode

    In the menu bar, select the File menu then deselect the Work Offline command. Click OK in the browser's Address field to display the home screen. When the router is installed, this box is checked. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page A-9 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 176 Annex A - Troubleshooting Page A-10 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 177: Annex B - Warnings For Safety

    B. Annex B - Warnings for safety This section covers Warnings for safety § B.1 the EC compliance declaration § B.2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page B-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 178: Warnings For Safety

    France in the whole of the band until further notice. The CE declaration of conformity can be viewed in the support section of the Sagem Communications site www.sagem-communications.com, or it can be obtained from the following...
  • Page 179: Annex C - Environment

    C. Annex C - Environment This section covers directive E 2002/96/CE § C.1 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page C-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 180: Directive E 2002/96/Ce

    Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communications SAS. Sagem Communications SAS‘ aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.
  • Page 181: D. Annex D - Technical Characteristics

    § D.1 the characteristics of the different interfaces § D.2 environmental characteristics § D.3 the application and the protocols § D.4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page D-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 182: Annex D - Technical Characteristics

    Display Marking Abbreviation Meaning • Green Power LED ADSL • Green ADSL LED Wi-Fi • Green WLAN LED Internet • Green/Red Internet LED Page D-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 183: Characteristics Of The Different Interfaces

    Half / Full Duplex Standard • IEEE 802.3 Connection technology • RJ45 • Type MDI or MDI-x self-detecting port • Crossed or straight cord SAGEM F@st™ 1704 Reference Manual - 253272861-A Page D-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 184 Input Voltage • 11 V - 13 V Power absorbed • < 7 W Connection technology • Miniature jack fixed connector diam. 3.5 mm Page D-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 185: Environmental Characteristics

    EN 61000-3-3 voltage Immunity • EN 55024 Radio part forpour ISM band at 2.4 GHz Transmission 802.11g/b • ETR 300 328-2 Ed. Juillet 2000 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page D-5 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 186: Application And Protocols

    RFC 2364 PPP over ETH over ATM • RFC 2516, RFC 1483/2684 IP over ATM • RFC 1483/2684 ETH over ATM • RFC 1483/2684 Page D-6 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 187 From ETH, USB and WAN (with specific option) Downloading of version • Client by http mode • Telnet TR69 • Via a ACS server SAGEM F@st™ 1704 Reference Manual - 253272861-A Page D-7 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 188 Annex D - Technical Characteristics Page D-8 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 189: Annex E - Default Configuration

    § E.1 the default configuration for the local network (LAN) § E.2 the default configuration for the local wireless network § E.3 (WLAN) SAGEM F@st™ 1704 Reference Manual - 253272861-A Page E-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 190: Default Username And Password

    Annexe E - Configuration par défaut This section details the values of the default parameters of your SAGEM F@st 1704 when it leaves the factory. These default parameters can be modified by a particular preconfiguration of your SAGEM F@st 1704.
  • Page 191: Default Configuration For The Local Wireless Network (Wlan

    The following table supplies the principal default WLAN parameters of your router. Characteristics (Wi-Fi) Value IP address 192.168.1.1/24 Enable Wireless Box checked SSID Sagem1704 Channel Auto Network Authentication SAGEM F@st™ 1704 Reference Manual - 253272861-A Page E-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 192 Annexe E - Configuration par défaut Page E-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 193: Annex F - Glossary

    F. Annex F - Glossary SAGEM F@st™ 1704 Reference Manual - 253272861-A Page F-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 194 Specifications which use the MAC protocol suitable for the wireless local IEEE 802.11b/g network (WLAN) in the 2.4 GHz band Internet Group Membership Protocol IGMP Internet Message Access Protocol IMAP Internet Protocol Page F-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 195 Remote Authentication Dial-In User Service RADIUS Request For Comments Réseau Numérique Intégration de Services RNIS Routing Information Protocol Real Time Control Protocol RTCP SAGEM F@st™ 1704 Reference Manual - 253272861-A Page F-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 196 Meshed network of information servers Wired Equivalent Privacy Weighted Fair Queuing Wireless Fidelity (wireless network) Wi-Fi Wireless Local Area Network WLAN Wireless Protected Access Page F-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 197: Annex G - Connector Technology

    LINE connector § G.1 pinouts of the PWR connector § G.2 pinouts of the LAN1, LAN2, LAN3 and LAN4 connectors § G.3 SAGEM F@st™ 1704 Reference Manual - 253272861-A Page G-1 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 198: Pinouts Of The Line Connector

    The mains unit is connected to the equipment using the miniature fixed connector of the case. Contact No Signal Meaning Intérieur +12 V Connexion DC "+" Extérieur Masse Connexion DC "-" Page G-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 199: Pinouts Of The Lan1, Lan2, Lan3 And Lan4 Connectors

    Not connected Note The Ethernet port is self-detecting. You can use either straight or crossed cables. An emission or reception signal is detected automatically. SAGEM F@st™ 1704 Reference Manual - 253272861-A Page G-3 Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 200 Annex G - Connectors Page G-4 SAGEM F@st™ 1704 Reference Manual - 253272861-A Sagem Communications SAS document. Reproduction and disclosure prohibited...
  • Page 202 Sagem Communications SAS Broadband and Residential Terminals Business Unit Headquarters: 250, route de l’Empereur 92500 Rueil-Malmaison - FRANCE www.sagem-communications.com...

Table of Contents