Appendix E - Default Configuration; Default User Name And Password For Http Access; Default Language For Http User Interface; Default Configuration On The Local Area Network Side - Sagem SAGEMFAST 1500WG Reference Manual

Appendix E - Default configuration

This section gives the default factory settings for the SAGEM F@st™ 1500. The
SAGEM F@st™ 1500 is set to "Router" mode by default.
These default settings can be modified by a special pre-configuration of the
SAGEM F@st™ 1500.This can be performed through CLI Telnet default commands.
E.1

Default user name and password for HTTP access

Password
E.2

Default language for HTTP User Interface

Language used to display HTTP pages: English
E.3

Default configuration on the local area network side

LAN characteristics
IP characteristics
IP - SERVICES
Default VLAN1 binding
characteristics
Default VLAN1 profile
characteristics
"Wireless" characteristics
Only
TM
SAGEM F@st
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E
Page E-2
Empty
IP address
Mask
BROADCAST, ARP, MULTICAST
RIP
DHCP server activated on the LAN
VLAN1 binding
Description
IP address
Subnet Mask
NAT Domain
IGMP Snooping
IGMP Querier
SSID broadcasting
ESSID
1500WG
Channel
WEP
Keys
Function - Mode State/Value
192.168.2.1
255.255.255.0
Enabled
Disabled
192.168.2.2 to 192.168.2.254
LAN1, LAN2, LAN3, LAN4,
WLAN
Default
192.168.2.1
255.255.255.0
Private
Disabled
Disabled
Enabled
"SAGEM"
6
Disabled
64 bits / Hex / Key1
(01/01/01/01/01)
E
E E