Table of Contents
Advertisement
User's Manual
2.5 Installation
2.5.1 HDD/SSD Installation
Step 1.Unscrew the 4 screws on the bottom cover,and open the HDD cover.
Step 2.Screw the HDD/SSD on the drive bay though 6 screws .
Step 3.Place the drive bay into the bottom cover.
Step 4.Screw 4 screws on the drive bay with the bottom cover.
Step 5. Use the SATA cable connect the SATA drive and the SATA power/data connector of mother board.
Step 6.Close the HDD cover ,screw the 4 screws on the bottom cover
Figure 2.23
16
Advertisement
Table of Contents
