Instrument Messages
Warning List
No.
Warning Message
14
Save trace error. Memory is full. Continue in 3 seconds.
15
Cannot modify the value now Continue in 3 seconds.
16
Changing CAL mode invalidates calibration. Press ENTER
to continue Press ESC to abort.
17
Changing frequency invalidates calibration. Press ENTER
to continue Press ESC to abort.
18
Delete this trace? Press ENTER to continue. Press ESC to
abort.
19
Delete all traces? Press ENTER to continue. Press ESC to
abort.
20
Freq range is changed. BW is below min. BW. Continue in
3 seconds.
21
Cannot upgrade. There isn't application in the U-disk.
Press ENTER/ESC to abort.
22
Upgrade complete. Press ENTER/ESC to abort.
90