Table of Contents
Advertisement
• Power Range
Accesses the Power Range submenu.
•
Auto Range
Enables and disable auto ranging. When auto rang-
ing is ON, the power sensor selects the best measur-
ing range for the measurement. When auto ranging is
OFF, the power sensor remains in the current range
and may be manually set by the user.
•
Range
Selects the Lower or Upper of power ranges when the
Auto Range is Off.
• Limits
Accesses the Limits submenu.
•
Limits
Enables or disables the limit function.
•
Upper Limit
Sets a value of the upper test limit for the current
measurement. The units used are dependent on the
current setting of power unit. When the measured
power is greater than the value specified, a failure will
be reported.
•
Lower Limit
Sets the lower test limit value for the current mea-
surement. The units used are dependent on the cur-
rent setting of power unit. When the measured power
is less than the value specified, a failure will be
reported.
•
Limit Beep
Enables or disables the limit beep.
• Rel/Offset
Accesses the Rel/Offset submenu.
•
Rel
Enables the comparison of a measurement result to a
reference value and sets a reference value on the cur-
rent measured data.
Key Reference
Mode
81
Advertisement
Table of Contents
