Konica Minolta FD-9 Instruction Manual page 31

6
Pull the handle on the inside cover to open the inside
panel and check that there is no paper inside the panel. If
there is paper there, remove it.
7
Pull up on the handle to open the top cover and check
that there is no paper inside the panel. If there is paper
there, remove it.
8
Close the top cover and inner cover, and then swing the
supply tray mechanism closed again.
9
If there is paper jammed on the exit tray side, remove it.
10
Replace the FD-9 in the Auto Sheet Feeder, connect all
cables again, and switch the FD-9 back on.
Troubleshooting
29