Table of Contents
Advertisement
10
Press
to select "Default gateway" and press
highlighted.
11
Press
or
repeatedly to set the desired value for the first number.
• Holding
or
pressed will cause the value to change continually.
• Values between 0 and 255 can be set. If
lowest value.
12
Press
to move to the next number.
13
Repeat steps 3 and 4 until all numbers have been set for the default
gateway.
14
Press
to select "SAVE DATA" and press
"Caution: It reboots after saving setting data" will be shown.
15
Press
to save the settings and reboot the FD-9.
Once these values have been set, connection to the FD-9 from within the same subnet can
be performed by specifying the IP address during connection.
. The first number of the default gateway will be
or
is pressed again when the lowest or highest value has been reached, the number will change to the highest or
. The message
Connecting FD-9 to Computer
21
Advertisement
Table of Contents
