General Safety Warnings; Description; Identification - Moretti Design AQUA User Manual

We would like to compliment you on purchasing a Moretti Design
hydro pellet stove heater.
Our products are well advanced in the heating and granular
combustion field, the advanced technology used as well as fine
detailed design, render our heaters the most performing and
reliable for pellet combustion. The high quality of materials used
combined with skilled craftsmanship all lead to a product that
meets all necessities that range from their aesthetic appearance to
functional use as well as rendering the room in which it is installed
more luxurious with its refined and clean look and unmistakable
warmth that only a flame can give.
PLEASE READ VERY CAREFULLY THE FOLLOWING
MANUAL BEFORE INSTALLING AND USING THE STOVE.
The boiler hydro stove simply indicated as "hydro stove", has been
constructed in a conformed way in accordance with the EN 14785
directive, taking in account relevant technical standards, using certified
components and performing regularly required check-ups to ensure its
safe use and functionality.
The hydro stove is delivered ready to be installed along with its user
manual and CE declaration. The following manual contains important
information that must be followed in order to use the hydro stove in a
safe manner. The user must read carefully this manual before operating
the stove and must pay attention to all indications and obligations given.
The hydro stove has been designed to produce hot air for heating and
hot water (by using an optional open expansion vessel circuit system) for
domestic needs, by burning wooden pellets in accordance with the
limitations given in the manual.

General safety warnings

All regulations regarding the installation and use of the hydro
stove, including those referring to National and European
standards must be complied with.
For a correct functionality, the hydro stove must be installed by qualified
personnel in accordance with regulation standards and the instruction
manual supplied by the manufacturer.
The hydro stove must be used exclusively for the purpose it was
designed for, any responsibility for eventual damage to things, people or
animals for an improper use of the product will be held at the user's
expense.
Do not use the hydro stove as an incinerator or in any other manner
other than that for which it was designed for.
Do not use fuels other than wooden pellets. Do not use liquid fuels.
Do not put pellets directly into the burner. Do not open the door whilst
the hydro stove is in function.
For its ordinary function, the user must apply all the indications derived
from a thorough reading of the user and maintenance manual, and
scrupulously observe the indications and signs located on the hydro
stove.
The plug of the power cable must be connected only AFTER the
installation and assembly of the appliance has been concluded and must
remain accessible afterwards, that is if the device does not have a
suitable and accessible double-pole switch.
Before any intervention for maintenance, the hydro stove must be
disconnected from any power source. Do not remove any signs or
protective casings from the stove.
Pay attention that the power cable does not touch any hot parts of the
hydro stove.
Do not turn off the hydro stove by disconnecting the cable from the main
power supply.
While the hydro stove is in function, its outer surface can reach high
temperatures so be cautious when handling to avoid burns.
The appliance cannot be used by children under the age of 8 and
persons with reduced physical, sensory or mental capabilities, or without
knowledge or experience required, provided that they are under
surveillance or after they have been given instructions on how to safely
use the appliance and they understand all hazards inherent to it.
The cleaning and maintenance intended to be performed by the user
must not be performed by unsupervised children.
Do not perform any unauthorized modifications to the hydro stove.
Use only original spare parts recommended by the manufacturer.
In the event the chimney flue catches fire, turn the hydro stove off by
pressing the turn off button, do not disconnect from the main power
supply and contact the local fire department.
The maximum pressure and minimum inlet from the water supply should
be: 0,5 bar (50 kPa) min and 1.5 bar (150 kPa) Max.
It is recommended the installation of an anti-condensation valve.
The qualified technician that will install the product, will also assume full
responsibility for the final installation and the subsequent functionality of
the product. There will be no liability from the manufacturer for the failure
to comply with such precautions.
After unpacking the hydro stove, make sure of the integrity of the product
and completeness of the contents, in case of non-compliance, contact
the dealer from whom the hydro stove was purchased from.
The hydro stove maintenance must be carried out at least once a year
by qualified personnel, one must plan in time this operating with the
technical service center.
On all Moretti Design products, at the end of the assembly line a
scrupulous check-up followed by a combustion test is carried out.
Therefore, we inform the customer that at the delivery of the product it is
normal to find traces of combustion, which testify the testing occurred.

DESCRIPTION

Identification

Attached on the back of the hydro stove, there is an identification plate
on which the following information is written:
2