Fire Protection; Warranty Conditions; Warranty Certification; Exclusion Of Liability - Moretti Design AQUA User Manual

To ensure that the hydro stove always has an optimal combustion
and to avoid malfunctions, frequent cleaning operations must be
carried out. The frequency of these operations may vary according
to the time of use of the stove and quality of the pellets.
To avoid the water from freezing in the plumbing system, it is re-
commended to not disconnect the electrical power from the hydro
stove, if the water temperature drops to 5 °C, it automatically activa-
tes the pump to prevent freezing.
An overall accurate maintenance check up of the stove must be
carried out annually, and this must be performed by a qualified
technician. The stove must be kept in such a way as to preserve
conditions that ensure safety and efficiency.

FIRE PROTECTION

One must be extremely cautious in the vicinity of fire, flames, heat,
electricity and other forms of energy, when using substances that can
cause fire an explosions and also the relative equipment used to avoid
them.
Owners, managers and users of buildings and facilities, must ensure the
safety of people, animals and objects.
Owners, managers and users of buildings and facilities are responsible
for the structures fire protection and heating systems. Buildings and
installations must be kept in good conditions according to local standards
and must always be ready for use.
People with surveillance duties must do what is necessary to instruct and
train all users on how to apply all precautionary measures required.
Those who discover a fire must immediately sound the alarm and report
the fire to the fire brigade and people at risk.
Safety distances between buildings and facilities must correspond to the
minimum distances required by building regulations and, where
necessary, must also comply with the minimum distances imposed by
the fire protection descriptions.
Safety distances must be calculated in such a way as to prevent the
propagation of fire between buildings and heating systems. All features
such as size, location and use of the building must be taken into
consideration.
In the case where the minimum safety distances imposed by building
regulations do not correspond and cannot be modified, it is necessary to
adopt additional measures to prevent the propagation of a fire.
All interior installations must be designed and constructed in conformity
with local regulations and must ensure a limitation of damage in case of
failure or damage.
Components, thermal resistance requirements, chemical and mechanical
features of the installation, must all comply with local regulations and
standards.
WARRANTY

Warranty certification

Thanking you for choosing our product, Moretti Fire s.r.l. invites you to
consult the user manual and to read the following warranty conditions
The manufacturer provides the customer with a 24 month period
warranty over the product, that starts from the date of purchase. In order
to enable the warranty, the client must send the warranty certificate to
the manufacturer headquarters, completely filled in, within 8 days from
the date of purchase and must keep a copy as proof of the purchase. It
must be sent to the following address:
Moretti Fire s.r.l. – C.da Tesino, 50 - 63065 Ripatransone (AP) ITALY
or via e-mail: info@morettidesign.it
A non received or incomplete warranty card voids the warranty.

Warranty conditions

The warranty is limited and only covers manufacturing defects.
Components not covered by warranty:
Ceramic glass
Door seals
Paint
Handles
Knobs
Majolica coating
Metal coating
Ignition resistance
Fuses
Combustion chamber parts
Wearing parts
The burner
The warranty does not cover damage caused by:
No first ignition and testing procedure carried out by a qualified technical
assistance centre (expense on the client's behalf).
Installation performed by non professional personnel and not in
compliance with standard regulations or used in a different manner than
that it was designed for.
Electrical overloads caused by lightening or non conformed electrical
sockets.
Transport and tampering by unauthorized personnel.
The non application at least once a year of cleaning and routine mainte-
nance procedures of the product by a qualified authorized servic
(expense on the client's behalf).
The use of cheap/poor quality fuel or any other material that can damage
the product.
Any damage caused by an improper installation and/or disattention of
the user.
The following interventions are not considered under warranty:
Interventions to adjust combustion parameters.
Interventions to repair damaged parts caused by poor maintenance.

EXCLUSION OF LIABILITY

Failure to comply with the operating conditions and decadence of the
warranty will result in the exclusion of the manufacturer from all liability
for any damage to the customer to animals and other people.
22