Normal; Modulation; Combustion Power Setting; The Menus - Moretti Design AQUA User Manual

Run Mode
After the ignition, the system goes into Run Mode. During this phase the
heating fan is activated and the system operates on the set combustion
power level.

Modulation

During the Run mode, the aim of the stove is to reach the set room
temperature, when this goal is achieved, the system goes into
Modulation where the fuel consumption is minimal and the fan will run at
the lowest speed power setting.

Combustion power setting

It is possible to modify the combustion power level at any time, but the
change is effective only in Run Mode. The power level ranges from 1 to
5. Increasing the power equals to a high pellet consumption and the
heating fan turning at high speeds.
Note: Turn off the stove in case of damage or malfunction.

THE MENUS

To enter the remote control Menu, press the SET button. A list of
Submenus will appear. When memorizing a new set value, it is also
transmitted towards the stove.
Order
1
2
3
4
5
6
7
8
9
10
11
12
13

Thermostats

Menu per for setting the radio and boiler thermostat used by the hydro
stove.
• To select the item in the menu use the
confirm press SET. To exit press ESC.
Thermostats

Fuel

Remote Keyboard

Summer Winter

Chrono

Time and Date
Puffer Thermostat: Menu for setting the temperature on the Puffer
Thermostat. It appears only if the configuration 2 or 3 are used (see
PLUMBING CONFIGURATION on page 23).
User menu
Thermostats
Fuel
Remote Keyboard
Summer Winter
Chrono
Time and Date
Calibration
Monitor
Load
Clean
Language
Settings
System Menu
buttons. To
Radio Thermostat
Boiler Thermostat
Puffer Thermostat
Fuel
Menu for selecting fuel type (type pellets).
Remote Keyboard
Menu that enables or disables the remote keyboard if connected to the
hydro stove.
Summer Winter
Menu for setting Summer Winter mode. Change setting only if the
configuration 2 or 3 are used (see PLUMBING CONFIGURATION on
page 23).
Chrono
This menu is used for setting the on/off switching time
frames.
•
To select the item in the menu use the
confirm press SET. To exit press ESC.
Thermostats
Fuel
Remote Keyboard
Summer Winter
Chrono
Time and Date
Modality: To switch the stove on/off, it is necessary to select Modality
after the on/off time frames have been programmed.
• To select the item in the menu use the
confirm press SET. To exit press ESC.
Modality
Chrono Program
Chrono Program: Select a desired program for setting (after
programming the time frames, to enable the on/off switching of the
stove, it is necessary to select the desired mode from the Modality
submenu:
•
To select the item in the menu use the
confirm press SET. To exit press ESC.
Daily
Select a desired day of the week and program the on/off switching time
frames. There are 3 on/off switching time frame phases for
Program Daily
Daily Monday
Tuesday
Weekly
Wednesday
Week-End
Thursday
Friday
buttons. To
Modality
Chrono Program
buttons. To
Modality
Disabled
Daily
Weekly
Week-End
buttons. To
Daily
Monday
ON OFF
09:30 11:15
00:00 00:00
00:00 00:00
10