Fan(S) - HP Pavilion 15 Maintenance And Service Manual

Fan(s)

Description
Fans for use in models with discrete graphics memory
Fan for use in models with UMA graphics memory
Before removing the fan(s), follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the fan in models with UMA graphics memory:
1. Disconnect the fan cable (1) from the system board.
2. Remove the three Phillips M2.0×4.0 screws (2) that secure the fan to the computer.
3. Remove the fan from the computer (3).
Remove the fans in models with discrete graphics memory:
1. Disconnect the fan cable (1) from the system board.
2. Remove the five Phillips M2.0×4.0 screws (2) that secure the fans to the computer.
54 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 31).
29).
Spare part number
L23895-001
L27902-001