Solid-State Drive - HP Pavilion 15 Maintenance And Service Manual

Solid-state drive

Description
512-GB, PCIe
256-GB, SATA-3, TLC
256-GB, PCIe
128-GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive module:
1. Remove the Phillips M2.0×3.0 screw (1) that secures the drive to the computer.
2. Remove the drive (2) by pulling it away from the socket.
Reverse this procedure to reassemble and install the solid-state drive.
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 31).
29).
Spare part number
L29691-001
L29689-001
L29690-001
L29688-001