Battery Pack And Charger - AAT max-e Q1604 Original User Manual

9.1 Battery pack and charger

WARNING – Never short-circuit or connect the poles of the battery pack to avoid
electric shocks!
CAUTION – During the charging procedure, ensure that cables are laid safely to avoid tripping
over them!
CAUTION – Do not attempt to repair or bypass defective fuses to avoid electric shocks!
CAUTION – Protect against moisture to avoid electric shocks!
i
NOTE – Never carry the charger by the charging cable/charging line.
NOTE – Charge the battery pack after each use! Exhaustive discharge results in a loss in
i
capacity and shortens the service life.
NOTE – Protect the charger and the motor vehicle voltage converter against oils, greases,
i
aggressive cleaning agents, thinning agents or damage.
i
NOTE – Observe the user manual for the charger/voltage converter.
NOTE – Store the battery pack in a frost-free environment at least one hour prior to start-up
i
to avoid malfunctions.
i Manufacturer's information:
The battery pack is maintenance-free and rechargeable. New batteries only
reach their full capacity after several charging cycles. During the charging
process, max-e cannot be operated.
Charge battery pack
Disable max-e (see chapter
6.5).
Unplug power cable.
» The battery pack can stay
in the battery bag when
being charged.
Charge battery pack.
» Plug the charger connector
into the charging port of the
battery pack.
23