Unplug the spiral cable from
the drive unit.
7
Disassembly
Remove max-e from the wheelchair:
Perform the installation steps (Chapter 5) performed during the
assembly in
reverse order:
1. Remove the anti-tip supports (chapter 5.5)
2. Remove the operating unit and its bracket (chapter 5.4)
3. Remove drive unit (chapter 5.3)
4. Remove battery pack (chapter 5.2)
If required:
5. Remove pair of wheels with toothed rings (chapter 5.1)
Unplug the other end of the
spiral cable from the socket
on the control unit.
21