Group Operation - Toshiba BMS-SM1280HTLE Owner's Manual

Smart Manager
5

Group Operation

1
2
(Example) Operating LINE 1, GROUP 4 (Cooling at 24°C, air volume: AUTO)
Power on
1 Line switching
ALL ZONE GROUP
2 / /
3 Group switching
ON
4
5 Operation mode switching
6 Air volume switching
7 Temperature setting
8 Swing/wind direction setting
(When no remote controller is
used)
9 Central/individual
(Only in the central control
mode)
STOP
* Indications on the LCD of the Smart Manager remain unchanged even when operation is stopped.
-EN
10
3 9
Turn on the power of the remote controller.
(Buttons on the remote controller are disabled while
fault.)
Select line 1 with the
Select
Select group number 4 with the
(Group number 4 blinks like
ON
Press the button to start operation.
COOL
Select mode with the
AUTO
Select air volume with the
Set temperature to 24°C with the
24°C
Select a louver position or up/down swinging with the
Change the setting with the
Individual: Controls with the remote controller are possible.
CENTRAL 1
:Disables operation start/stop using the remote controller.
CENTRAL 2
:Disables operation start/stop, operation mode switching, and temperature
setting using the remote controller.
CENTRAL 3
:Disables operation mode switching and temperature setting using the remote
controller.
CENTRAL 4
:Disables operation mode switching using the remote controller.
CENTRAL
" " is displayed for central or individual control other than above.
Press the OFF button to stop operation.
5 6
button.
with the button.
GROUP
.)
button.
button.
SET TEMP.
button.
Owner's Manual
4
STOP
7
8
is displayed, but this is not a
and buttons.
and buttons.
button.