Network Configuration Guide Smart Manager 3) Click [Network and Sharing Center]. (Fig.2) Never connect the Smart Manager to Fig.2 the Internet. We assume no responsibility for any problems resulting from connection to the Internet. Prohibited Only local area connection is allowed for the Smart Manager.
Network Configuration Guide Smart Manager 3-2. Setting Browser 7) Select the “Use the following IP address:” radio button, and set as follows: <Internet Explorer> IP address: 192.168.2.*** (***: Excluding 30) 1) Start Internet Explorer. Subnet mask: 255.255.255.0. 2) Click [Tools] on the toolbar. (Fig.1) Then click [OK].
Network Configuration Guide Smart Manager 6) Clear the “Use a proxy server for your LAN” <Firefox> checkbox (Fig.5) or select the “Bypass proxy 1) Start Firefox. server for local addresses” checkbox (Fig.6), 2) Click [Tools] and choose “Options” from the and then click [Advanced].
Network Configuration Guide Smart Manager Select the “No proxy” checkbox (Fig.5) or the “Manual proxy configuration:” checkbox, and then add “192.168.2.30” to the “No Proxy for:” field in the Connection Settings window. (Fig.6) Fig.5 Fig.6 6) Select a URL by language and type it into the address bar to connect to the Smart Manager (Web type air conditioning control system).
Network Configuration Guide Smart Manager 4. Displaying and Changing IP 4-2. Changing IP address address of the Smart Manager The following procedure describes how to change an IP address using an example of changing IP IP address, subnet mask, default gateway, and address to 192.168.2.38.