Toshiba B-FV904T-H-QM-R Installation Manual

Toshiba B-FV904T-H-QM-R Installation Manual

Advertisement

Installation Manual for the B-FV904T-H-QM-R Peel-off module
1. Carefully read and follow all the instructions in this manual. Failure to do so could create safety hazards
such as fire or electric shocks.
Instructions in this manual must be followed when installing option kits or adding cables to avoid
system failures and to insure correct performance and operation.
Failure to follow the manual's instructions or any unauthorized modifications, substitution or change
to this product will void the product warranty.
2. Before installing this option, be sure to turn off the power switch and disconnect the power adapter
connector from the printer.
2
3. Take care not to trap or pinch your fingers or hands with the covers.
4. Before installing this option, remove the media and ribbon from the printer.

1. APPLICABLE MODEL

This optional device is the peel-off module, which is designed for the following models:
 B-FV4T Series

2. PACKING LIST

All the following parts are supplied with the option. Make sure you have all items shown listed below.
 Peel-off Module (1 pc.)
WARNING!
1
 Installation Manual (1 copy)
- 1 -
B-FV904T-H-QM-R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-FV904T-H-QM-R and is the answer not in the manual?

Questions and answers

Summary of Contents for Toshiba B-FV904T-H-QM-R

  • Page 1 B-FV904T-H-QM-R Installation Manual for the B-FV904T-H-QM-R Peel-off module WARNING! 1. Carefully read and follow all the instructions in this manual. Failure to do so could create safety hazards such as fire or electric shocks.  Instructions in this manual must be followed when installing option kits or adding cables to avoid system failures and to insure correct performance and operation.
  • Page 2 B-FV904T-H-QM-R 3. INSTALLATION PROCEDURE 1) Turn off the printer power, disconnect the power plug from the AC outlet, and disconnect the AC adapter from the printer. 2) Open the Top Cover. 3) Take off the Front Panel by removing 2 screws as shown below.
  • Page 3 9) Close the Top Cover. The installation is now completed. Check that the Peel-off unit operates correctly. PRINTED IN TAIWAN R140423O8900-TTEC © 2014 TOSHIBA TEC CORPORATION All Rights Reserved EO2-38098 1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN JUNE 2014 - 3 -...

Table of Contents