Care And Cleaning - Grindmaster ICB-400 Operation And Instruction Manual

American metal ware
Hide thumbs Also See for ICB-400:
Table of Contents

Advertisement

Care and Cleaning

HOT LIQUIDS AND SURFACES ARE PRESENT IN THIS EQUIPMENT. TO AVOID BURNS
USE CAUTION WHEN CLEANING. RINSE HOT PARTS WITH COLD WATER BEFORE
CLEANING. USE GLOVES OR A HEAVY CLOTH WHEN REMOVING HOT PARTS FROM
BREWER.
After Each Brew
1)
Dispose of grounds and rinse the brew basket.
2)
Rinse shuttles, airpot or insulated container before reuse.
Everyday
1)
Wash the brew baskets with warm, soapy water. The wire basket can be removed to aid cleaning of the brew
basket.
2)
Remove the spray heads that are located above the brew baskets using gloves or a heavy towel. Wash to
remove any coffee oils and to clean any plugged holes.
3)
Clean shuttles and insulated containers with warm, soapy water and a plastic or non abrasive brush or towel.
4)
Clean airpots with warm, soapy water and a bottle brush. Take care not to break the glass interior. Use only
a soft cloth and warm, soapy water or stainless steel polish on the outside to avoid scratching exterior
surface.
5)
Wipe the exterior of the brewer with a damp cloth. Do not use abrasives, which can scratch brewer surfaces.
6)
If shuttles are to be left on warmer overnight, fill with water to avoid coffee oil burn-in.
Weekly or Biweekly, Depending upon Use
1)
Fill the shuttle, airpot or insulated container with hot water to about 2/3 full.
2)
Pour the recommended amount of urn cleaner into the container. (Excessive amounts of cleaner will attack
the stainless steel lining of the shuttle and insulated container.)
Urn cleaners that have been used successfully:
DIP-IT, manufactured by Economics Laboratories, Inc.
4 Corporate Park Drive
White Plains, NY 10604
3)
Scrub the liner interior with a plastic bristle brush.
4)
Remove the knurled nut at the top of the gauge glass and clean the glass with a small bottle brush.
5)
Pour out the contents of the shuttle.
American Metal Ware
®
!
WARNING: BURN HAZARD!
Brewers
OXYLITE, manufactured by Avril, Inc., Syndet Division
601 North Third Street
Reading, PA 19601
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icb-300P-330P-430Rap-430Rap-330Raps-430 ... Show all

Table of Contents