Table of Contents
Advertisement
SBS NO IDI: GROUP ICE CRUSHER AND WATER DISPENSER
For ice and water dispensing, a plumbing connection must be made between the household water
supply and the dual solenoid valve mounted on the rear cabinet rail.
1. The automatic ice maker is mounted on the left wall of the freezer liner. Water automatically fills
the mould, freezes into ice and dumps ice into the storage bin.
2. When the storage bin is full, a shut-off arm prevents additional ice production until ice has been
removed, which lowers the shut-off arm. The storage bin will hold approximately 3,6 kilograms of
ice. A motor driven helix is mounted near the bottom of the storage bin.
When energised, the helix moves the ice to the front of the storage bin where ice is directed into
the exit.
3. In cube mode, a solenoid is engaged together with the AC motor. The ice bypasses the crusher
blades and is dispensed into a glass.
4. In crushed mode, the solenoid is not energised so the ice is forced into the crusher blades
conduit. Crushed ice pieces will vary in size and shape. See the following diagram to understand
the overall concept.
5. Keep bits of ice from being sprayed beyond glass by placing a glass with a large opening close
to the ice chute.
6. Dispense ice by holding glass against ice lever arm. The mechanically operated ice chute door
opens, and the motor driven helix is energised and ice is automatically dispensed into glass. When
glass is withdrawn, a delay mechanism slowly closes the ice chute door.
WARNING
To avoid risk of personal injury or property damage, refrigerator must be unplugged and
ice storage bin must be removed before attempting to service dispenser system.
Never put fingers, hands, or foreign objects into ice dispenser opening while attempting to
manually clear stalls or jams. Never use sharp objects to break ice. In case of stall or jam in
cube or crushed mode, dispense in opposite mode several times. There may be a delay when
switching between cube and crushed ice. This is normal. It takes a few seconds for cubes to
be moved from storage bin.
Ice dispensing operates as follows:
Front and Rear side motor dispenser/solenoid assy.
AC motor
Solenoid
45
Advertisement
Table of Contents
