Table of Contents
Advertisement
Hinges noise?
2
Damper noise?
Possible reason:
Not correct fixing of bottom hinge.
Check that the screws are completely fixed.
If the noise problem persist, follow the instruction in
Service Bulletin 4812 711 40180.
3
1
Possible reason - On recent appliances (after
w18 2008 for IDI, after w23 for NO IDI):
Air baffle is no more a single component, it became
an assembly. Noise could be generated by a
friction between sliding door and EPS cover.
Cut a small part of both EPS cover (see picture below),
following the instructions in the
40328.
Note: In this case is not necessary to replace the damper!
Service Bulletin 4812 711
72
Advertisement
Table of Contents
