Motorola XT801 User Manual page 64

General Information
FCC Part 68 and ACTA
This equipment complies with
Part 68 of the FCC rules and
with technical requirements
adopted by the Administrative
Council for Terminal Attachments
(ACTA). The label on the back
or bottom of this equipment
contains, among other things, a
product identifier in the format
US:AAAEQ##TXXXX. This
identifier must be provided to
your telephone service provider
upon request.
The plug and jack used to
connect this equipment to
premises wiring and the
telephone network must comply
with applicable Part 68 rules
and technical requirements
adopted by ACTA. A compliant
63
telephone cord and modular plug
are provided with this product.
It is designed to be connected
to a compatible modular jack
that is also compliant. An RJ11
jack should normally be used for
connecting to a single line and
an RJ14 jack for two lines. See
the installation instructions in the
user's manual.
The Ringer Equivalence Number
(REN) is used to determine how
many devices you may connect
to your telephone line and still
have them ring when you are
called. The REN for this product
is encoded as the 6th and 7th
characters following the US: in
the product identifier (e.g., if ## is
03, the REN is 0.3). In most, but
not all areas, the sum of all RENs
should be five (5.0) or less. For
more information, contact your
telephone service provider.
This equipment must not be
used with Party Lines. If you
have specially wired alarm
dialing equipment connected to
your telephone line, ensure the
connection of this equipment
does not disable your alarm
equipment. If you have questions
about what will disable alarm
equipment, consult your
telephone service provider or a
qualified installer.
If this equipment is
malfunctioning, it must be
unplugged from the modular
jack until the problem has
been corrected. Repairs to this
telephone equipment can only