Preparing The Adcp - Teledyne WorkHorse Deployment Manual

WorkHorse Monitor/Sentinel Deployment Guide

Preparing the ADCP

P
R E P A R I N G T H E
Checking you have all of the Monitor/Sentinel parts
Installing the documentation and software
Registering Velocity software
Installing the batteries
Checking the system is closed properly
Identifying what's in the Box
Included with the Monitor/Sentinel system:
Part Number Name
WHS1200, 600, 300 Sentinel system
WHM1200, 600, 300 Monitor system
Included with the WorkHorse Accessories Kit:
Part Number Name
717-7000-00 Shipping case
717-3030-xxx I/O cable
717-3014-00 AC Power Adapter
737-3010-00 RS-422 to RS-232
Converter (Monitor only)
757K6023-00 Alkaline Battery Pack
(Sentinel only)
977-6013-00 Memory (Sentinel only)
97Z-8000-00 Marine Measurements
CD
RDI Tools and TRDI Toolz
WinSC /PlanADCP
WinADCP
Monitor/Sentinel
957-6229-00
Deployment Guide
757K6037-00 Spare parts and tools
(200 & 500 m)
A D C P
I N C L U D E S T H E F O L L O W I N G S T E P S
Description
The Workhorse Monitor/Sentinel system includes the transducer, Memory card (Sentinel
only), dummy plug, and protective cap. When unpacking, use care to prevent physical
damage to the transducer face and connector. Use a soft pad to protect the transducer.
Description
Shipping case with custom foam cutouts.
The I/O cable is used for serial communications.
The AC Adapter runs on any standard AC power and supplies +48 VDC to run the
WorkHorse when the batteries are not connected.
Converts RS-422 to RS-232 for serial communications.
WorkHorse Sentinel batteries are shipped inside the WorkHorse ADCP but
Connect the battery and seal the WorkHorse ADCP before deployment.
The WorkHorse Sentinel ADCP includes one memory card installed inside the system. Two
PCMCIA memory card slots are available for all WorkHorse ADCPs.
This CD has PDF versions of all of the WorkHorse documentation including the WorkHorse
ADCP Commands and Output Data Format Guide. Please read the manual!
Utility and testing software package that can be used to test the ADCP.
The WinSC program works as a shell program to launch the PlanADCP program. The
PlanADCP program allows the user to create a deployment configuration file. After creating
a deployment configuration file (or loading an existing file) the WinSC program will continue
with the testing, deployment, recovery of data, and quick view of the data.
Gives users a visual display of the entire set of data. You can zoom in on a portion of the
data for closer analysis and export data to text or MatLab files. For detailed information on
how to use WinADCP, see the WinADCP User's Guide.
A printed guide showing WorkHorse Monitor/Sentinel inventory and set up. A PDF version
is included on the Marine Measurements CD.
Contains tools, O-Rings, and close-up hardware. See the WorkHorse Operation Manual,
Maintenance chapter for a list of included parts.
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
June 2018
:
not connected.
Page 1