PCI latency timer
Use this to adjust the PCI Latency Timer. This option sets the latency of all PCI
devices on the PCI bus. The Optimal and Fail-Safe default setting is 64.
Allocate IRQ to PCI VGA
Set this value to allow or stop the system from giving the VGA adapter card an inter-
rupt address. The Optimal and Fail-Safe default setting is Yes.
Palette snooping
Set this value to allow the system to modify the Palette Snooping settings. The Opti-
mal and Fail-Safe default setting is Disabled.
PCI IDE BusMaster
Set this value to allow or prevent the use of PCI IDE Busmastering. The Optimal and
Fail-Safe default setting is Disabled.
Off board PCI/ISA IDE card
Set this value to allow an add-on PCI/ISA IDE card to be selected. The Optimal and
Fail-Safe default setting is Auto.
IRQ
IRQ[3,4,5,7,9,10,11,14,15]:
–
Available: Specified IRQ is available to be used by PCI/PnP devices.
–
Reserved: Specified IRQ is reserved for use by Legacy ISA devices.
DMA Channel [0,1,3,5,6,7]:
–
Available: Specified DMA is available to be used by PCI/PnP devices.
–
Reserved: Specified DMA is reserved for use by legacy ISA devices.
–
Reserved Memory Size: Size of memory block to reserve for legacy ISA
devices.
PCE-7214 User Manual
34