Monitor; Ctcss - Uniden UH810S Owner's Manual

Operation

Monitor

This feature enables users to listen in for weak signals on the current
channel at the press of a button.
To use monitor,
• For continuous listening.
Press and hold [SCAN/MON]
A beep tone will be heard and
the receiver circuit will stay open, letting
in both the noise & weak signals.
• RX LED flashes green.
• To return to normal receive mode
Press [SCAN/MON]

CTCSS

CTCSS is a feature that allows a group
to talk to each other without hearing
other users on the same channel.
1. Select desired channel.
2. Press [MENU/MEM] 3 times.
DCS/CTCSS setting ashes.
3. Press or
4. Press & hold [MENU/MEM] to save and exit.
Select oF to turn DCS/CTCSS off for the selected channel.
NOTE
UNIDEN UH810S/UH820S
to change the selection.
23
Handheld UHF-CB Transceiver