Table of Contents
Advertisement
7. After recording the configuration key value, press the ? key on the PrintValet
again. The second line of the PrintValet screen displays the PrintConnect IP
address. Record this value.
To complete the PrintConnect setup, you must configure a few options in your PrinterOn
printing service account.
2.2 Adding the PrintConnect to your PrinterOn printing
service
After connecting the PrintConnect to the network, you can add it to the PrinterOn service
by attaching it as a Print Delivery Station (PDS). A PDS is a component of the PrinterOn
service that manages the delivery of print jobs to a set of associated printers. Typically, a
PDS is a lightweight piece of software installed on a computer. A PrintConnect is a just
"headless" PDS that is on a self-contained piece of hardware.
A PrintConnect is added through the web admin portal.
Before configuring the PrintConnect, ensure that you have the device's Configuration Key
(recorded in
Step 7 of Connecting the PrintConnect to the
uses this value to attach the configured PDS settings to the PrintConnect hardware.
PrinterOn PrintConnect Installation and Configuration Guide
Setting up the PrintConnect
network) available. PrinterOn
|
8
Advertisement
Table of Contents
