Table of Contents
Advertisement
A.2 Error Codes
The PrintValet keypad may display an error code if problems occur during
operation. The following codes can help to determine the problem.
Codes are of two possible types:
A.2.1 Installation Codes
These codes may appear on the PrintValet during the installation or
configuration of your PrintConnect.
NET Error: 01
The network cable is unplugged or faulty, or the network is not active.
Description:
Solution:
•
Installation Codes
•
Printing Codes
This error may indicate that the cable was disconnected or failed, or
the network went dead after having worked during initial startup.
The system was unable to acquire an IP address or other required
network information from DHCP. Static IP address configuration
may be incorrect.
Ensure that the PrintConnect has access and can communicate with
a DHCP server. If DHCP server is not available, configure the
PrintConnect's network configuration settings manually.
Verify that the Ethernet cable is functioning. Verify that the cable is
connected to a functioning Ethernet hub or switch. The
PrintConnect device is compatible with 10Base-T or 100Base-TX
Ethernet (automatic negotiation at power up). The network activity
light flashes when network activity is detected (that is, when data is
being transferred).
PrinterOn PrintConnect v4.1 Installation and Configuration Guide
|
31
Advertisement
Table of Contents
