Configuring Printconnect Networking Settings - PrinterOn PrintConnect Installation And Configuration Manual

4. If you selected Use Manual Configuration, configure the required proxy settings
as necessary.
Setting
Proxy Address
Proxy Port
User Name
Password
Re-enter Password
5. Click Save and Test to save all settings and test your proxy configuration.

3.1.4 Configuring PrintConnect networking settings

The Basic Networking tab lets you configure PrintConnect for DHCP or fixed IP address.
By default, PrintConnect uses DHCP (Dynamic Host Configuration Protocol). If your
network has a DHCP server installed and accessible to the PrintConnect, you do not need
to configure the IP address. DHCP allows the PrintConnect to automatically obtain the
required networking configuration parameters such as IP Address, netmask, gateway and
DNS Server addresses.
If you don't have a DHCP server on your network, you must set a Fixed IP address for the
PrintConnect and configure any required network settings. If you are unsure what IP
address to use, please consult your network administrator.
3.1.4.1 Setting a Fixed IP address
To set a fixed IP address:
1. Check Enable Fixed IP.
2. Specify the IP Address, Netmask, Gateway and at least one DNS Server address.
The Fixed IP Domain value is optional. The Domain value is used in domain name
resolution.
3. Click Save and Apply to update the network settings.
After applying the changes, the network connection is restarted and you will see a
web page with two links; one with IP address and the other based on a domain
name for the PrintConnect.
Description
The IP address for your proxy.
The communication port for your proxy.
The authentication credentials for proxies which require
authentication. For non-authenticating proxies, the
username/password are ignored.
PrinterOn PrintConnect Installation and Configuration Guide
Configuring the PrintConnect
| 16