Table of Contents
Advertisement
The browser window automatically tries to reconnect to your PrintConnect after
two minutes.
3.1.6 Configuring and viewing the PrintConnect logs
The Log tab lets you set the log level and to view the log files.
To view a log file:
1. Click on a log file button to view the log for the indicated time period.
The button label indicates creation time of the log. For example,
Director20140514044114.276.log was created on 2014 05 14 at 04 hours 41
minutes 14.276 seconds.
Note: PrintConnect's real time clock is set to UTC and does not use Daylight Saving
Time.
To set the log level:
1. Select the log level from the drop down list.
2. Click Save Log Level.
3.2 Configuring the PrintConnect with a USB drive
If your PrintConnect is having communication issues, you can use a text file on a USB flash
drive to hard set some configuration values. There are two kinds of files you can create:
•
Configuration file: Lets you configure the minimum network options to allow
your PrintConnect to communicate with the network and the PrinterOn web site.
For more information, see
•
Reset file: Lets you reset your PrintConnect configuration to the default values.
For more information, see
Note: For best results use a USB key with a capacity of 4 GB or lower; the PrintConnect may not
recognize the presence of a higher capacity USB key. In addition, the USB key must be formatted
with the FAT or FAT32 file system. The PrintConnect cannot read files on a USB key that is
formatted with the NTFS file system.
Configuring network settings with a configuration
Resetting the
PrintConnect.
PrinterOn PrintConnect Installation and Configuration Guide
Configuring the PrintConnect
file.
|
18
Advertisement
Table of Contents
