Table of Contents
Advertisement
3.1.2.2 Adding an Operator or Local Administrator
To add an Operator or Administrator:
1. In the User Name field, enter the name of the user.
2. From the User Class drop down, specify the user type. User Class can be
Administrator or Operator.
3. In the Password field, enter a password for the user.
4. Click Save.
3.1.2.3 Deleting an Operator or Local Administrator
To delete an Operator or Administrator:
1. Delete the User Name of the Operator or Administrator you wish to remove.
2. Click Save.
3.1.3 Configuring proxy settings
The Proxy Settings tab lets you configure the PrintConnect to work in network situations
where all traffic has to go through an HTTP Proxy. For network proxies that do NOT use
these particular features, the configured values on the Proxy tab are ignored, so the
default values do not need to be changed.
To support an HTTP Proxy:
1. Check Enable HTTP Proxy.
2. Select one of the following options:
•
Use Web Proxy Automatic Discovery: The PrintConnect attempts to
automatically detect proxy configuration information on your local network
using automatic detection protocols.
Note: Automatic Discovery cannot be used for proxies that require authentication.
In those cases, you must manually configure proxy communication details.
•
Use Manual Configuration: Requires you to manually configure proxy details.
3. If you selected Use Web Proxy Automatic Discovery, click Discover Now to
attempt to find a proxy.
If a Proxy is found and communication with the PrinterOn web site is successful,
the Proxy Resolution status will display a Success or OK message.
PrinterOn PrintConnect Installation and Configuration Guide
Configuring the PrintConnect
|
15
Advertisement
Table of Contents
