Table of Contents
Advertisement
4.2 Releasing print jobs
By default, the PrinterOn Service is configured for secure release. This means that users
must supply a release code before the printer is able to print the job.
There are two ways to enter your release code to release the job to the printer for printing:
•
Using the
•
Using the Privacy Release web
4.2.1 Releasing print jobs using the connected PrintValet
To release print jobs using the PrintValet:
1. Display the Home screen then press the OK key.
Note: To return to Home screen, press CANCEL.
2. At the ID code prompt, enter the 4-10 digit release code that corresponds with the
print job(s) you sent, then press OK.
Once the release code is entered, the Network PrintValet searches for your print
job and displays the number of jobs that match that release code with the total
number of pages.
3. To confirm and print your jobs, press OK.
4.2.2 Releasing print jobs using the Privacy Release web pages
The Privacy Release web pages provide an alternative to using the PrintValet keypad to
release print jobs, and provide a web-based interface for managing releasing print jobs.
The pages list current and completed print jobs, and can be used to manually print and
delete print jobs.
In a typical public printing environment, the Privacy Release web pages are made
accessible on a computer near the destination printer(s). To simplify the experience for
users, you can make the Privacy Release main page the default web page for the
computer's browser or make it available from a link on the desktop.
PrintValet.
pages.
PrinterOn PrintConnect Installation and Configuration Guide
Printing to your PrintConnect printers
|
25
Advertisement
Table of Contents
