Table of Contents
Advertisement
3
Configuring the PrintConnect
This section of the PrintConnect guide assumes that you are familiar with network
configuration, including IP addresses, DNS and DHCP servers, and proxy servers. If you
need assistance in this area, please consult your network administrator or your PrinterOn
reseller before attempting to configure the PrintConnect.
There are two methods for configuring you're PrintConnect:
•
Configuring PrintConnect via web
•
Configuring the PrintConnect with a USB
3.1 Configuring PrintConnect via web interface
The PrintConnect has a web page interface, the Print Delivery Station Administration
console, for configuring operator access, changing network and proxy settings, and
viewing the log file. This interface can be accessed in any web browser.
Note: The PrintConnect does not use TLS when accessing the PrintConnect web interface;
therefore passwords may be transmitted as clear text. The workstation version of the Print
Delivery Station software supports TLS for the web interface if required.
To open the Print Delivery Station Administration console:
1. Open the PDS privacy release page. In your web browser, go to http://
<localhost>:8181
interface.
drive.
12
Advertisement
Table of Contents
