Checking For Software Updates - PrinterOn PrintConnect Installation And Configuration Manual

Plug-and-print network device
Table of Contents

Advertisement

PrintConnect attempts to determine these links based on your configuration.
However, two issues may prevent these links from successfully connecting:
Dynamic assignment of IP addresses may prevent PrintConnect from
successfully identifying the IP address.
Using a domain name relies on your network having an active and correctly
configured DNS server.
4. Wait about 15 seconds, then click one of the links to reconnect to the
PrintConnect.
Note: If you are unable to connect using one of the provided links, you can try
connecting using http://<localhost>:8181, where <localhost> is the IP address of the
PrintConnect device.
To find the IP address of the PrintConnect, press the ? key on the PrintValet keypad
twice. The number will be similar to 172.16.182.185 so, to connect to the
PrintConnect device, you would enter:
http://172.16.182.185:8181

3.1.5 Checking for software updates

The Software Upgrade tab lets you check for updated software for your PrintConnect
device. If a software update is available, you can download and install it.
To check for a software upgrade:
1. Click the Check Now button.
Your PrintConnect device queries the PrinterOn Web site for the latest available
version of the embedded PDS software and displays the results on the Software
Upgrade tab.
The Current Version is the version of the software currently installed on your
PrintConnect device.
The Available Version is the version of the software available for download
from the PrinterOn Web site.
2. To install a software upgrade when a software upgrade is available, click Download
and Install.
Your PrintConnect device downloads and installs the software upgrade. This
operation can take several minutes, depending on the speed of your Internet
connection. Please wait while the software is downloaded and installed.
Once the software upgrade is downloaded, your PrintConnect device will
automatically reboot in order to install the new software.
PrinterOn PrintConnect Installation and Configuration Guide
Configuring the PrintConnect
|
17

Advertisement

Table of Contents
loading

Table of Contents