2
Setting up the PrintConnect
To set up a PrintConnect, you need to:
1.
Connect the PrintConnect device to your
2.
Adding the PrintConnect to your PrinterOn
2.1 Connecting the PrintConnect device to the network
Before you connect the PrintConnect device, ensure that you have all the
installation hardware
Important! Do not power up the PrintConnect until instructed to do so.
To connect the PrintConnect:
1. With the PrintConnect device powered off, connect the PrintValet keypad to any
USB port on the PrintConnect device.
2. Plug the ethernet cable into the network port on the back of the PrintConnect and
connect the cable to your network.
3. If you are using a direct USB connection to your printer, attach the printer to an
available USB port on the PrintConnect.
Note: You can use a single PrintConnect device to manage multiple printers, however,
only one of these printers can be a USB-connected printer.
available. .
network.
service.
required
6